Ball valve, 3-piece, with pneumatic actuator, weld end 21.3 mm, DN 15, spring opening

Made to DIN 3202-S13, this ball valve shuts the line with a quarter turn of the ball, driven by the pneumatic rack-and-pinion actuator. It is supplied with butt weld ends of 21.3 mm diameter, nominal size DN 15 mm, face-to-face length 75 mm and switching function spring opening. The article is made of 1.4408.

Benefits

• The three-piece body allows the ball insert to be removed without undoing the ports of 15 mm nominal size.
• The pressure range of -0.9 to 63 bar also covers vacuum duty.
• The spring opening version determines the position the valve takes without pilot air.
• The butt weld ends of 21.3 mm diameter are welded straight into the pipe run.
• Body and ball in 1.4408 with a PTFE seat also carry aggressive media at 15 mm nominal size.
• Produced to DIN 3202-S13.

Applications

On vacuum and compressed air runs the range of -0.9 to 63 bar covers both duties with a single device.

Standards and conformity

Face-to-face length 75 mm and the weld ends comply with DIN 3202-S13.