Ball valve, 3-piece, with pneumatic actuator, G 1", DN 25, spring opening

As a ball valve the article shuts the line with a quarter turn of the ball, driven by the pneumatic rack-and-pinion actuator. This version comes with thread G 1", nominal size DN 25 mm, face-to-face length 90 mm and switching function spring opening. It is complemented by a nominal size of DN 25 mm.

Benefits

• The three-piece body allows the ball insert to be removed without undoing the ports of 25 mm nominal size.
• The pressure range of -0.9 to 63 bar also covers vacuum duty.
• The spring opening version determines the position the valve takes without pilot air.
• The face-to-face length of 90 mm follows DIN 3202-M3.
• Body and ball in 1.4408 with a PTFE seat also carry aggressive media at 25 mm nominal size.

Applications

On vacuum and compressed air runs the range of -0.9 to 63 bar covers both duties with a single device.

Standards and conformity

The face-to-face length of 90 mm complies with DIN 3202-M3.