PVC-U ball valve, pneumatic actuator, DN 32, spring closing, female thread, EPDM seal

Once installed, the ball valve shuts off water and neutral liquids with a PVC-U body and a pneumatic quarter-turn actuator. This version is listed with nominal size DN 32, connection thread Rp 1-1/4" and installation length 121 mm. Decisive for the selection is a flow rate of 1000 l/min. The version is listed with a spring closing actuator and the connection female thread, EPDM seal.

Benefits

• Nominal size DN 32 with a flow rate of 1000 l/min.
• Nominal pressure 0 - 16 bar, the ball valve works from 0 to +60 °C.
• Installation length 121 mm, PVC-U body with a PTFE ball seat.
• Quarter-turn actuator spring closing with a control pressure of 6 to 10 bar.
• Connection female thread, EPDM seal on the ball valve.
• Actuator housing in anodised aluminium with NBR seals, temperature range -20 to +80 °C.

Applications

In water treatment the DN 32 valve shuts off a line carrying 1000 l/min.

Standards and conformity

The actuators carry an ATEX marking for equipment groups 2G and 2D. The ball valve is rated for 0 to +60 °C.