PVC-U ball valve, pneumatic actuator, DN 32, spring closing, solvent socket, EPDM seal

In use, the ball valve shuts off water and neutral liquids with a PVC-U body and a pneumatic quarter-turn actuator. The data also state a nominal pressure range of 0 - 16 bar. Its rating is a flow rate of 1000 l/min. In addition the data give a spring closing actuator and the connection solvent socket, EPDM seal.

Benefits

• Nominal size DN 32 with a flow rate of 1000 l/min.
• Nominal pressure 0 - 16 bar, the ball valve works from 0 to +60 °C.
• Installation length 121 mm, PVC-U body with a PTFE ball seat.
• Quarter-turn actuator spring closing with a control pressure of 6 to 10 bar.
• Connection solvent socket, EPDM seal on the ball valve.
• Actuator housing in anodised aluminium with NBR seals, temperature range -20 to +80 °C.

Applications

In industry the valve of 121 mm installation length and the connection solvent socket, EPDM seal is fitted into the line.

Standards and conformity

The actuators carry an ATEX marking for equipment groups 2G and 2D. The ball valve is rated for 0 to +60 °C.