PVC-U ball valve, pneumatic actuator, DN 20, double acting, solvent socket, FKM seal

Once installed, the ball valve shuts off water and neutral liquids with a PVC-U body and a pneumatic quarter-turn actuator. The article is listed with a flow rate of 380 l/min. This version is listed with nominal size DN 20, solvent socket of 25 mm inside diameter and installation length 92 mm. Material PVC-U is listed for this version. Also stated are a double acting actuator and the connection solvent socket, FKM seal.

Benefits

• Nominal size DN 20 with a flow rate of 380 l/min.
• Nominal pressure 0 - 16 bar, the ball valve works from 0 to +60 °C.
• Installation length 92 mm, PVC-U body with a PTFE ball seat.
• Quarter-turn actuator double acting with a control pressure of 6 to 10 bar.
• Connection solvent socket, FKM seal on the ball valve.
• Actuator housing in anodised aluminium with NBR seals, temperature range -20 to +80 °C.

Applications

In water supply the double acting actuator does the switching at a nominal pressure of 0 - 16 bar.

Standards and conformity

The quarter-turn actuator carries an ATEX marking for equipment groups 2G and 2D. The control pressure is 6 to 10 bar.