Images are examples, some edited with AI. The technical data are authoritative. AI notice

Straight push-in connector for tubing OD 10 mm, PBT NPQE-D-Q10-E-F1A-P10 - Festo 8158793

Festo ✓ Original product Brand new

The straight push-in connector NPQE-D-Q10-E-F1A-P10 joins two tubes with an OD of 10 mm without tools. The NPQE-D-Q10-E-F1A-P10 is rated for -0.95 to 8 bar operating pressure and -5 to 60 °C ambient temperature. The housing is made of PBT, corrosion resistance class CRC 1.

Net
€5.35
excl. VAT
Item FES-8158793
Manufacturer no. NPQE-D-Q10-E-F1A-P10
Question about this item
  • Specialist dealer since 2009
  • Invoice payment for regular customers
  • Worldwide shipping
  • Technical questions clarified with the manufacturer

Description

The straight push-in connector NPQE-D-Q10-E-F1A-P10 joins two tubes with an OD of 10 mm without tools. The NPQE-D-Q10-E-F1A-P10 is rated for -0.95 to 8 bar operating pressure and -5 to 60 °C ambient temperature.

Benefits

  • From vacuum up to 8 bar operating pressure -0.95 to 8 bar across the full temperature range
  • Push-pull principle push the tube in, press the blue release ring to remove it
  • Housing made of PBTcorrosion resistance class CRC 1
  • Tubing seal made of NBR
  • LABS (PWIS) conformity to VDMA24364 zone III
  • Cleanroom suitable class 4 to ISO 14644-1

Applications

NPQE-D-Q10-E-F1A-P10 is used to extend and repair tubing lines with an OD of 10 mm. Approved medium for the NPQE-D-Q10-E-F1A-P10: compressed air to ISO 8573-1:2010 [7:4:4], lubricated operation possible..

Technical data

FeatureValue
TypeNPQE-D-Q10-E-F1A-P10
Festo part number8158793
SizeStandard
Nominal width9.3 mm
Mounting positionAny
DesignStraight
ConstructionPush-pull principle
Operating pressure, full temperature range-0.95 to 8 bar
Operating mediumcompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible
Corrosion resistance class CRC1 - low corrosion stress
LABS (PWIS) conformityVDMA24364 zone III
Suitability for Li-ion battery productionSuitable for battery production with reduced Cu/Zn/Ni content (F1a)
Cleanroom suitability, measured to ISO 14644-14Class 4 to ISO 14644-1
Ambient temperature-5 to 60 °C
Product weight9.02 g
Pneumatic connection 1For tubing OD 10 mm
Pneumatic connection 2For tubing OD 10 mm
Release ring colourBlue
Material noteRoHS compliant
Housing materialPBT
Release ring materialPOM
Tubing seal materialNBR
Tubing clamp segment materialHigh-alloy stainless steel
Weight0.009 kg
ManufacturerFesto
Hersteller-NrNPQE-D-Q10-E-F1A-P10
EAN4052568599201
Zolltarifnummer74122000
GPSR HerstellerdatenFesto Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com
ArtikelzustandNew
Artikel-AuthentizitätOriginal product
MaterialPBT
Bauformgerade Form
For hose OD [mm]10
Nominal size DN [mm]9,3
Size BGStandard
Seal materialNBR
MediumCompressed air
Betriebsdruck max [bar]8
Temperaturbereich-5-60 °C
Temperature (max.)60

Downloads

Questions about this item

Any other question?

Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.

Customers Who Bought This Item Also Bought