Brass angle ball valve, G 1/8" (AG/IG), PN 20, seals PA /, pressure rating PN -0.98 to 20 bar

This brass angle ball valve shuts off the flow in the line with a quarter turn. Decisive here are G (male thread) G 1/8" and G (female thread) G 1/8". The version is made of nickel-plated brass. The stated sealing material is PA.

Benefits

• full bore in the open position and therefore low pressure loss, verified by G (male thread) G 1/8"
• temperature range -20 to +80 °C
• G (female thread) G 1/8"
• pressure rating PN -0.98 to 20 bar
• material nickel-plated brass as stated in the data
• sealing material PA

Applications

Typical fields of application are pipework, compressed air networks and plant construction. According to the data sheet water, neutral gaseous and non-aggressive liquid media, mineral oils, compressed air, vacuum are approved.