Brass ball valve, DVGW, Rp 3/4", -0.9 to 40 bar, standard, thread G Rp 3/4"

This brass ball valve shuts off the flow in the line with a quarter turn. Decisive here are thread G Rp 3/4" and version standard. The version is made of nickel-plated brass. The stated sealing material is PTFE.

Benefits

• full bore in the open position and therefore low pressure loss, verified by thread G Rp 3/4"
• temperature range -20 to +150 °C
• made to DVGW
• made to DIN 3202
• version standard
• pressure rating PN -0.9 to 40 bar

Applications

Typical fields of application are pipework, compressed air networks and plant construction. According to the data sheet water, neutral gaseous and non-aggressive liquid media, mineral oils, compressed air, vacuum, gases nach DVGW Arbeitsblatt are approved.

Standards and conformity

Manufacture follows DVGW and DIN 3202.