Brass ball valve, DVGW, Rp 3/4", -0.9 to 40 bar, T-handle, thread G Rp 3/4"

Supplied as a brass ball valve, this item shuts off the flow in the line with a quarter turn. The defining values are thread G Rp 3/4" and version T-handle. The body is made of nickel-plated brass. Sealing is handled by PTFE.

Benefits

• full bore in the open position and therefore low pressure loss, verified by thread G Rp 3/4"
• sealing material PTFE
• temperature range -20 to +150 °C
• made to DVGW
• made to DIN 3202
• version T-handle

Applications

The version is applied in pipework, compressed air networks and plant construction. The media specification covers water, neutral gaseous and non-aggressive liquid media, mineral oils, compressed air, vacuum, gases nach DVGW Arbeitsblatt.

Standards and conformity

The stated standard is DVGW and DIN 3202.