Brass ball valve, direct mounting flange G 1/2", -0.9 to 40 bar, nominal size DN 15 mm

Listed as a brass ball valve, this version shuts off the flow in the line with a quarter turn. This version carries thread G 1/2" at direct mounting flange to ISO 5211 F03. The material specified is nickel-plated brass. The seals are made of PTFE.

Benefits

• full bore in the open position and therefore low pressure loss, verified by thread G 1/2"
• material nickel-plated brass as stated in the data
• sealing material PTFE
• temperature range -20 to +120 °C
• made to ISO 5211
• pressure rating PN -0.9 to 40 bar

Applications

It finds its place in pipework, compressed air networks and plant construction. The listed media are water, compressed air, vacuum, oils, fuels, heating oil, solvents, weak acids and alkalis.

Standards and conformity

The article complies with ISO 5211.