Brass ball valve, G 1/2", -0.98 to 65 bar, spring-closing, DN 15

Installed in the line, this brass ball valve shuts off the flow in the line with a quarter turn. The data sheet states thread G 1/2". The stated material is nickel-plated brass. The seals are made of PTFE / FKM.

Benefits

• full bore in the open position and therefore low pressure loss, verified by thread G 1/2"
• material nickel-plated brass as stated in the data
• sealing material PTFE / FKM
• made to DIN 3202
• pressure rating PN -0.98 to 65 bar
• temperature range -20 to +170 °C

Applications

The article is called for in pipework, compressed air networks and plant construction. According to the data sheet water, compressed air, vacuum, oils, fuels, heating oil are approved.

Standards and conformity

The stated standard is DIN 3202.