Riegler
Push-in L-fitting »Blue Series« long, rotating - Riegler K1278
Item RGL-K1278
As low as
€2.02
Images are examples, some edited with AI. The technical data are authoritative. AI notice
Push-in L-fitting, rotating - Riegler K1443
Push-in L-fitting, rotating. 16 variants from 29.29 EUR.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
Push-in L-fitting, rotating. This range covers 16 variants from 29.29 EUR. Select the version you need above.
Available variants
Shared technical data
| Applications | Druckluftanl., Chem.- u. Lebensm., Pharma, Verp., Vakuum |
|---|---|
| Max. working pressure | 20 bar |
| Min. working pressure | -0,98 bar |
| Max. operating temperature | 150 °C |
| Min. operating temperature | -20 °C |
| Sealant | FKM, FPM |
| Recommended pipe materials | PVDF, PTFE, PA, PU |
| Standard thread | ISO 7-1 |
| Material | Edelstahl 1.4404 |
| Medium | Druckluft, korrosive Medien (soweit mit Material verträgl.) |
| Max. medium temperature | 150 °C |
| Min. medium temperature | -20 °C |
| Series | inox line |
| Country of origin | IN |
| Customs tariff number | 73072910 |
About Male elbows
Push-in L-fittings turn a tube line through 90 degrees and remove the need for a separate elbow ahead of the consumer. The range accepts tube outside diameters from 3 to 16 mm and works up to 10 to 20 bar depending on version. The lower limit goes down to -0.99 bar, so vacuum lines can be built with the same parts.
What matters when choosing
- Thread: The range covers G 1/8 to G 1/2 male, tapered R 1/8 to R 1/2 male, metric M3, M5 and M6 male plus G 1/4 female. Versions with two ports list thread 1 from G 1/8 to G 1/2 female and thread 2 from G 1/8 male to R 1/2 male separately.
- For tube O.D.: The figure of 3 to 16 mm refers to the outside diameter of the tube, not to the nominal bore. It has to match the tube exactly, otherwise the collet loses its grip.
- Working pressure: The upper limit sits between 10 and 20 bar, the lower limit between -0.99 and 0 bar. Vacuum work calls for the version with the negative lower limit.
- Material and sealant: Plastic with nickel-plated brass, all nickel-plated brass and stainless steel 1.4404 are available, sealed with NBR, FKM or FPM, or FKM or FPM in an FDA-compliant version.
- Medium and series: Besides compressed air, the data covers water, neutral gases and liquids, oil and grease as well as corrosive media within the limits of material compatibility. Series range from Blue Series and Blue Series mini through click-clock, metallica and universal short to inox line and NonPlusUltra.
Typical applications
- Connecting pneumatic cylinders where a straight outlet leaves no room at the end cap.
- Piping valve manifolds and control blocks with tight bend radii.
- Vacuum lines on suction cups and handling equipment.
- Plants with wash-down cycles, where stainless steel 1.4404 faces splash water and cleaning agents.
- Filling and packaging lines that need an FDA-compliant seal close to the product.
Thread standards ISO 7-1, DIN EN ISO 228-1 and DIN 13-1 are recorded for part of the 445 items. Operating temperature is given as -20 °C at the low end and, depending on material, 80 to 150 °C at the top.
Technical data
| Thread | R 1/8 AG, R 1/4 AG, R 3/8 AG, R 1/2 AG |
|---|---|
| For hose OD [mm] | 4, 6, 8, 10, 12, 14, 16 |
| Manufacturer | Riegler |
| GPSR Herstellerdaten | Riegler & Co. KG, Schützenstraße 27, DE-72574 Bad Urach, www.riegler.de |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Norm | DIN 13-1, DIN EN ISO 228-1 |
Downloads
Datasheet
- Datasheet (PDF)
- Data sheet Male elbows 135140 DE
- Data sheet Male elbows 135141 DE
- Data sheet Male elbows 135142 DE
- Data sheet Male elbows 135143 DE
- Data sheet Male elbows 135144 DE
- Data sheet Male elbows 135145 DE
- Data sheet Male elbows 135146 DE
- Data sheet Male elbows 135147 DE
- Data sheet Male elbows 135148 DE
- Data sheet Male elbows 135149 DE
- Data sheet Male elbows 135150 DE
- Data sheet Male elbows 135151 DE
- Data sheet Male elbows 135152 DE
- Data sheet Male elbows 135153 DE
- Data sheet Male elbows 135154 DE
- Data sheet Male elbows 135155 DE
User Manual
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day. Ask a question
Customers Who Bought This Item Also Bought
Riegler
Push-in L-fitting »Blue Series« long, rotating - Riegler K1277
Item RGL-K1277
As low as
€2.86
