Everis LQ8 non-spill coupling body, 5/8" locking hose barb, chrome-plated brass, EPDM - CPC LQ8D17010L

LQ8D17010L forms the body half of an Everis LQ8 connection and takes the hose directly on its 5/8" (15.9 mm) locking barb. Its valve shuts on its own as the halves separate, and CPC lists less than 0.033 cc of spillage per disconnect at 0 psi.

Use in the data center

• Hose runs between cold plates and the rack manifold in direct-to-chip cooling.
• Service and component swaps without draining the loop, since the coupling can be separated under pressure.
• Glycol/water coolant: CPC specifies the EPDM seal for exactly this.

Benefits

• Clampless hose retention: the locking barb secures reinforced tubing without an extra clamp.
• Minimal drip: below 0.033 cc per disconnect at 0 psi and below 0.042 cc at 30 psi.
• Backup sealing: redundant seals guard against leaks over extended service.
• One-handed use: ergonomic latch with an audible click once connected.

Packing unit

Packing unit: 10 pcs. Price per piece, ordered in steps of 10 pcs.

Datasheet

The Everis LQ8 series datasheet is available under Downloads.