Everis LQ6 non-spill coupling body, 1/2" hose barb, chrome-plated brass, FKM, red - CPC LQ6D17008REDV

This version of the LQ6D17008RED coupling body swaps the EPDM seal for FKM. Everything else follows the standard part: 3/8" flow, a 1/2" hose barb and a valve that CPC rates at 0.03 cc of spillage per disconnect.

Use in the data center

A typical position is the hose connection between cold plates and the rack manifold. The barb accepts coolant tubing sized 1/2" ID. For maintenance or hot-swap the coupling is released under pressure, the loop stays filled. The warm red marking identifies one side of the loop, often the warm return, with blue parts used for the supply.

Benefits

• FKM seal: CPC offers FKM next to EPDM as a standard option for dielectric and glycol/water coolants.
• Non-spill disconnect: CPC rates the loss at 0.03 cc per disconnect, so nearby electronics stay dry.
• No seal friction while connected: disconnects stay drip-free even after long periods in service.
• Color coding: the colored marking tells supply and return lines apart at a glance.

Packing unit

Packing unit: 10 pcs. Price per piece, ordered in steps of 10 pcs.

Datasheet

The Everis LQ6 series datasheet is available under Downloads.