Everis LQ6 non-spill coupling insert, 3/8" locking hose barb, chrome-plated brass, EPDM, red - CPC LQ6D22006LRED

Marked in warm red and fitted with a 3/8" locking hose barb, LQ6D22006LRED is the counterpart to the blue version. CPC lists a pressure range from vacuum to 8.3 bar and 0.03 cc of spillage per disconnect.

Use in the data center

A typical position is the hose connection between cold plates and the rack manifold. The locking barb keeps the hose firmly on the fitting. For maintenance or hot-swap the coupling is released under pressure, the loop stays filled and only 0.03 cc of coolant escapes. The warm red marking identifies one side of the loop, often the warm return, with blue parts used for the supply.

Benefits

• Release under pressure: the 0.03 cc spillage figure applies both at 0 psi and at 120 psi (8.3 bar).
• Locking hose barb: the locking profile keeps the pushed-on hose secured on the fitting.
• Redundant sealing: a second sealing point while connected adds protection against leaks.
• No seal friction while connected: disconnects stay drip-free even after long periods in service.

Packing unit

Packing unit: 10 pcs. Price per piece, ordered in steps of 10 pcs.

Datasheet

The Everis LQ6 series datasheet is available under Downloads.