Elastomer expansion joint, flange connection DN50-PN16 (DIN/EN), bellows in EPDM (high temperature)

Once installed, the expansion joint takes up length change, lateral offset and angular deflection of the pipe run and damps structure-borne noise. Material EPDM (high temperature) is listed for this version. The data state a nominal size of DN 50. Also stated are the DN50-PN16 (DIN/EN) flange connection.

Benefits

• Nominal size DN 50 on flange connection DN50-PN16 (DIN/EN) at a working pressure of -1 to 16 bar.
• Axially the bellows takes 30 mm of compression and 10 mm of extension.
• Lateral offset up to 15 mm and angular deflection up to 25 degrees.
• Bellows in EPDM (high temperature) with a steel cord carrier, permitted up to max. +110 °C.
• Face-to-face length 125 mm at 16 mm flange thickness and 165 mm flange outside diameter.
• Steel flanges that turn on both sides make it easier to line up the hole patterns during installation.

Applications

In plant engineering the joint on connection DN50-PN16 (DIN/EN) takes up an offset of up to 15 mm.