Elastomer expansion joint, flange connection DN150-PN16 (DIN/EN), bellows in EPDM

Once installed, the expansion joint takes up length change, lateral offset and angular deflection of the pipe run and damps structure-borne noise. The data also state a working pressure of 0 - 16 bar. The stated figure is a nominal size of DN 150. In addition the data give the DN150-PN16 (DIN/EN) flange connection.

Benefits

• Nominal size DN 150 on flange connection DN150-PN16 (DIN/EN) at a working pressure of 0 - 16 bar.
• Axially the bellows takes 40 mm of compression and 10 mm of extension.
• Lateral offset up to 15 mm and angular deflection up to 12 degrees.
• Bellows in EPDM with a synthetic fabric carrier, permitted up to max. +90 °C.
• Face-to-face length 150 mm at 22 mm flange thickness and 285 mm flange outside diameter.
• Steel flanges that turn on both sides make it easier to line up the hole patterns during installation.

Applications

In heating and cooling circuits the bellows in EPDM takes up the length change of 40 mm.