Compact flow control valve, exhaust air control (standard), R 1/2", tube 10 mm, -0.95 bar

Screwed directly into the cylinder port, a function fitting saves tubing and space. This compact flow control valve takes the thread R 1/2" and leads to a tube of 10 mm outside diameter. The push-in connector holds the tube with stainless steel gripping claws. The materials are body Nickel-plated brass / PA 66, release ring PA 66, seal NBR, retaining claws stainless steel, cartridge ZnDC zinc-plated. The operating pressure is stated as -0.95 bar.

Advantages

• Media Compressed air, neutral gases, the valve needs no separate treatment.
• Version exhaust air control (standard), so the speed is limited on the correct side of the piston.
• Push-in connector for tube with 10 mm outside diameter, release works without tools through the release ring.
• Connection thread R 1/2" for screwing directly into the cylinder end cap.
• Materials body Nickel-plated brass / PA 66, release ring PA 66, seal NBR, retaining claws stainless steel, cartridge ZnDC zinc-plated, only silicone-free seals and lubricants are used during assembly.

Applications

• Avoiding the stick-slip effect on slow running actuators.
• Matching forward and return stroke in cycled handling devices.
• Production environments within the temperature range -20 to +80 °C.
• Speed adjustment on pneumatic cylinders with 10 mm tube.