Compact flow control valve, exhaust air control (standard), G 3/8", tube 8 mm, -0.95 bar

The speed of a pneumatic cylinder is set through the air volume, not through the pressure. This compact flow control valve connects the thread G 3/8" to a tube of 8 mm outside diameter and works with exhaust air control (standard). The throttle screw acts in one flow direction only, in the opposite direction the check valve opens fully. The materials are body Nickel-plated brass / PA 66, release ring PA 66, seal NBR, retaining claws stainless steel, cartridge ZnDC zinc-plated. The temperature range runs from -20 to +80 °C.

Advantages

• Temperature range of -20 to +80 °C, suitable for production environments with changing load.
• Media Compressed air, neutral gases, the valve needs no separate treatment.
• Version exhaust air control (standard), so the speed is limited on the correct side of the piston.
• Push-in connector for tube with 8 mm outside diameter, release works without tools through the release ring.
• Connection thread G 3/8" for screwing directly into the cylinder end cap.

Applications

• Production environments within the temperature range -20 to +80 °C.
• Speed adjustment on pneumatic cylinders with 8 mm tube.
• Screwing directly into cylinder end caps with thread G 3/8".
• Avoiding the stick-slip effect on slow running actuators.