Hybrid and RFID couplings

Hybrid couplings

The CPC hybrid coupling carries fluid or air plus electrical lines for power and signal through a single connector. A twist latch joins every line in one motion, so modular tools, hand pieces or umbilicals can be changed quickly. Dry-break valves keep the medium in place on disconnection; depending on the version, pressure runs from vacuum to 1.0 or 3.1 bar at 0 to 49 °C. Polypropylene body, EPDM seal and a 3.2 mm (1/8") hose connection.

2 items
1 manufacturer
Net prices plus VAT

Buying guide

How to choose Hybrid couplings

What matters when choosing: properties, comparison and typical applications.

Selection criteria

Criterion	Available	Note
Lines	Fluid or air, power, signal	One connection point instead of several separate connectors.
Version	Valved coupling body, panel-mount insert	Body hangs in the line, insert is fixed in the device.
Pressure	Vacuum to 1.0 bar or 3.1 bar	Choose according to the operating pressure of the device.
Temperature	0 to 49 °C, 4 to 38 °C	Check the value for each item.
Materials	Polypropylene, EPDM	Chemically resistant housing.
Connection	3.2 mm (1/8") hose	Inner diameter of the hose.

Frequently asked questions

Which lines can the hybrid coupling connect?: Fluid or air together with electrical wires for power and signal. One connection point between device and tool, hand piece or umbilical replaces several separate connectors.
Does fluid escape on disconnection?: The hybrid coupling uses dry-break valves that close as the halves separate, so the medium stays in the line and in the device.
What pressure and temperature are permitted?: Depending on the version, pressure ranges from vacuum to 1.0 bar or to 3.1 bar. Operating temperature is 0 to 49 °C or 4 to 38 °C respectively.
How is the coupling mounted?: The coupling body hangs free in the line, while the panel-mount insert fits into the device wall or panel. The hose connection has a 3.2 mm (1/8") inner diameter.