Threaded hose nozzle with parallel thread, G 2", hose 50 (2") mm, polypropylene (black)

In use, the threaded hose nozzle takes a hose over a barbed nozzle to a parallel pipe thread and holds it there with a clamp. It is supplied with thread G 2" and hose connection 50 (2") mm. It is produced from polypropylene (black).

Benefits

• Parallel thread G 2" and hose connection 50 (2") mm in one part, so no adapter is needed.
• Width across flats 60 mm, so the nozzle can be tightened with an ordinary open-ended spanner.
• Material polypropylene (black), FDA compliant and resistant to chemicals at a low weight.
• Temperature range 0 to +80 °C for this material.
• Nominal pressure PN 10.

Applications

On tanks and filters the nozzle is screwed in over its 60 mm flats and the hose follows with a clamp.

Standards and conformity

Thread G 2" is parallel and therefore seals through a flat gasket and not through the thread itself.