Threaded hose nozzle with parallel thread, G 1/8", hose 4 mm, PVDF (natural)

Once installed, the threaded hose nozzle takes a hose over a barbed nozzle to a parallel pipe thread and holds it there with a clamp. It is supplied with thread G 1/8" and hose connection 4 mm. The article is made of PVDF (natural).

Benefits

• Parallel thread G 1/8" and hose connection 4 mm in one part, so no adapter is needed.
• Width across flats 14 mm, so the nozzle can be tightened with an ordinary open-ended spanner.
• Material PVDF (natural), FDA compliant and resistant to chemicals at a low weight.
• Temperature range -20 to +120 °C for this material.
• Nominal pressure PN 10.

Applications

In food and beverage technology the joint stays tight at -20 to +120 °C and PN 10.

Standards and conformity

Thread G 1/8" is parallel and therefore seals through a flat gasket and not through the thread itself.