Threaded hose nozzle with parallel thread, G 1/4", hose 4 mm, polypropylene (natural)

Once installed, the threaded hose nozzle takes a hose over a barbed nozzle to a parallel pipe thread and holds it there with a clamp. In addition the sheet lists a width across flats of 17 mm. Decisive for the selection is a hose inside diameter of 4 mm.

Benefits

• Parallel thread G 1/4" and hose connection 4 mm in one part, so no adapter is needed.
• Width across flats 17 mm, so the nozzle can be tightened with an ordinary open-ended spanner.
• Material polypropylene (natural), FDA compliant and resistant to chemicals at a low weight.
• Temperature range 0 to +80 °C for this material.
• Nominal pressure PN 10.

Applications

In chemical dosing the nozzle in polypropylene (natural) takes hose 4 mm to a pump with a G 1/4" thread.

Standards and conformity

Thread G 1/4" is parallel and therefore seals through a flat gasket and not through the thread itself.