Threaded hose nozzle with parallel thread, G 1/4", hose 10 mm, PVDF (natural)

Once installed, the threaded hose nozzle takes a hose over a barbed nozzle to a parallel pipe thread and holds it there with a clamp. The data also state a width across flats of 17 mm. This version comes with thread G 1/4" and hose connection 10 mm.

Benefits

• Parallel thread G 1/4" and hose connection 10 mm in one part, so no adapter is needed.
• Width across flats 17 mm, so the nozzle can be tightened with an ordinary open-ended spanner.
• Material PVDF (natural), FDA compliant and resistant to chemicals at a low weight.
• Temperature range -20 to +120 °C for this material.
• Nominal pressure PN 10.

Applications

In chemical dosing the nozzle in PVDF (natural) takes hose 10 mm to a pump with a G 1/4" thread.

Standards and conformity

Thread G 1/4" is parallel and therefore seals through a flat gasket and not through the thread itself.