Cylinder switch type D, 2-wire solid-state sensor, 10 to 28 V DC, M8 plug, red LED - Fluidics equipment

The type D cylinder switch detects the piston position without contact via the magnetic piston, the red LED shows the switching state directly on the cylinder. It operates as normally open contact with 2-wire solid-state sensor at 10 to 28 V DC.

Key benefits

• 2-wire solid-state sensor, normally open contact
• Operating voltage 10 to 28 V DC, max. 50 mA, max. 1.4 W
• Protection IP 67, temperature range -10 to +70 °C
• For cylinders with C-slot and 5 mm T-slot, with clamping band also for round cylinders Ø 8 to 63 mm
• Red LED as switching status indicator
• No mounting parts needed in C-slot and 5 mm T-slot, adapter for other slot shapes included

Applications

Type D cylinder switches sit directly in the C-slot or 5 mm T-slot of the cylinder, on Ø 8 to 63 mm round cylinders with a clamping band, and signal end positions to the control. The version with 0.15 m cable (2x 0.1 mm²) with 3-pin M8 plug is designed for controls with 10 to 28 V DC.