Images are examples, some edited with AI. The technical data are authoritative. AI notice
Electric cylinder unit with toothed belt, size 60, stroke 50 mm, IO-Link EPCE-TB-60-50-FL-ST-M-H1-PLK-AA - Festo 8102170
Electric cylinder unit with integrated stepper motor, encoder and controller: 50 mm stroke, up to 150 N feed force and ±0.05 mm repetition accuracy. The EPCE-60 is controlled via digital I/O or IO-Link, so no separate motor controller is needed.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
50 mm stroke, 150 N feed force and ±0.05 mm repetition accuracy: the EPCE-TB-60-50-FL-ST-M-H1-PLK-AA is an electric cylinder unit with toothed belt that already contains motor, encoder and controller. It is suited to short, fast infeed and pressing movements.
Benefits
- Compact integration: motor, encoder and controller of the EPCE-60 in one unit, connected via M12 plugs for 24 V DC and logic.
- Two ways to control: the EPCE-60 runs via IO-Link Device V 1.1 or 2 digital inputs (PNP), just like a pneumatic cylinder with a valve.
- Repeatable: ±0.05 mm at up to 0.6 m/s and 9 m/s² acceleration.
- Load capacity: feed force up to 150 N, reference payload 10 kg horizontal and 5 kg vertical.
- Low maintenance: lifetime lubrication and 500 km reference service life, degree of protection IP40.
Applications
In assembly and handling systems the EPCE-60 replaces pneumatic cylinders where intermediate positions or adjustable forces are needed. The piston rod with male thread M10x1,25 takes tools or grippers directly. The EPCE-60 is rated for 0 to 50 °C ambient temperature, with 2 % power reduction per K above 30 °C.
Technical data
| Effective diameter of drive pinion | 10.18 mm |
|---|---|
| Size | 60 |
| Stroke | 50 mm |
| Stroke reserve | 0 mm |
| Piston rod thread | M10x1.25 |
| Toothed-belt stretch | 0.375 % |
| Toothed-belt pitch | 2 mm |
| Mounting position | Any |
| Piston-rod end | Male thread |
| Type of motor | Stepper motor |
| Position detection | Motor encoder |
| Design | With toothed belt, With integrated drive |
| Protection against torque/guide | With plain-bearing guide |
| Referencing | Positive fixed stop block, Negative fixed stop block |
| Rotor position sensor | Absolute encoder, single turn |
| Rotor position sensor, encoder measuring principle | magnetic |
| Temperature monitoring | Switch-off for excessive temperature, Integrated precise CMOS temperature sensor with analogue output |
| Additional functions | Built-in end-position sensing |
| Display | LED |
| Ready status indication | LED |
| Maximum acceleration | 9 m/s² |
| Maximum speed | 0.6 m/s |
| Speed "Speed press" | 0.02 m/s |
| Repetition accuracy | ±0.05 mm |
| Features of digital logic outputs | Configurable, Not galvanically isolated |
| Duty cycle | 100% |
| Insulation protection class | B |
| Maximum current digital logic outputs | 100 mA |
| Maximum current consumption | 5300 mA |
| Maximum current consumption, logic | 0.3 A |
| Nominal voltage DC | 24 V |
| Nominal current | 5.3 A |
| Parameterisation interface | IO-Link, User interface |
| Rotor position transducer resolution | 16 bit |
| Permissible voltage fluctuations | +/- 15 % |
| Power supply, connection type | Plug |
| power supply, connection system | M12x1, T-coded according to EN 61076-2-111 |
| Power supply, number of pins/wires | 4 |
| Approval | RCM |
| KC mark | KC-EMV |
| CE mark (see declaration of conformity) | To EU EMC Directive, In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK RoHS instructions |
| Vibration resistance | Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class CRC | 0 - No corrosion stress |
| LABS (PWIS) conformity | VDMA24364 zone III |
| Storage temperature | -20 to 60 °C |
| Relative air humidity | 0 - 90% |
| Degree of protection | IP40 |
| Protection class | III |
| Ambient temperature | 0 to 50 °C |
| Note on ambient temperature | Power must be reduced by 2% per K at ambient temperatures above 30°C |
| Impact energy in end positions | 0.016 J |
| Maximum moment Mx | 0 Nm |
| Maximum moment My | 1 Nm |
| Maximum moment Mz | 1 Nm |
| Maximum feed force Fx | 150 N |
| Reference value effective load, horizontal | 10 kg |
| Reference value effective load, vertical | 5 kg |
| Feed constant | 32 mm/rev |
| Reference service life | 500 km |
| Maintenance interval | Lifetime lubrication |
| Moving mass | 237 g |
| Moving mass for 0 mm stroke | 188 g |
| Additional moving mass per 10 mm stroke | 9.75 g |
| Product weight | 1579 g |
| Basic weight for 0 mm stroke | 1350 g |
| Additional weight per 10 mm stroke | 46 g |
| Number of digital logic outputs 24 V DC | 2 |
| Number of digital logic inputs | 2 |
| Specification logic input | Based on IEC 61131-2, type 1 |
| Working range of logic input | 24 V |
| Features of logic input | Configurable, Not galvanically isolated |
| IO-Link, SIO-Mode support | Yes |
| IO-Link, Protocol version | Device V 1.1 |
| IO-Link, communication mode | COM3 (230.4 kBaud) |
| IO-Link, Port class | A |
| IO-Link, Number of ports | 1 |
| IO-Link, Process data length OUT | 2 bytes |
| IO-Link, Process data content OUT | Move intermediate 1 bit |
| IO-Link, Process data length IN | 2 bytes |
| IO-Link, Process data content IN | State Device 1 bit, State In 1 bit, State Intermediate 1 bit, State Move 1 bit, State Out 1 bit |
| IO-Link, Service data IN | Speed 32 bit, Position 32 bit, Force 32 bit |
| IO-Link, Min, cycle time | 1 ms |
| IO-Link, Data storage required | 500 byte |
| Maximum cable length | 15 m outputs, 15 m inputs, 20 m with IO-Link operation |
| Switching logic for outputs | PNP (positive switching) |
| Switching logic for inputs | PNP (positive switching) |
| IO-Link, connection technology | Plug |
| Logic interface, connection type | Plug |
| Logic interface, connection technology | M12x1, A-coded according to EN 61076-2-101 |
| Logic interface, number of pins/wires | 8 |
| Type of mounting | With female thread, With accessories |
| Note on materials | RoHS compliant |
| Material cover | Anodised wrought aluminium alloy |
| Material housing | Anodised wrought aluminium alloy |
| Material piston rod | High-alloy stainless steel |
| Material toothed belt | Polychloroprene with glass fibre |
| Weight | 1.7 kg |
| Manufacturer | Festo |
| Hersteller-Nr | EPCE-TB-60-50-FL-ST-M-H1-PLK-AA |
| EAN | 4052568551810 |
| Zolltarifnummer | 84798997 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Stroke [mm] | 50 |
| Housing material | Aluminium, anodised |
| Operating voltage | 24 V DC |
| Protection rating | IP40 |
| Temperaturbereich | 0-50 °C |
| Temperature (max.) | 50 |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.





