Images are examples, some edited with AI. The technical data are authoritative. AI notice

Electric cylinder unit with ball screw, size 32, stroke 100 mm, lead 3 mm/rev, IO-Link EPCS-BS-32-100-3P-A-ST-M-H1-PLK-AA - Festo 8118268

Festo ✓ Original product Brand new

For pressing, joining and positioning with high force: the EPCS with ball screw comes with motor, absolute encoder and controller on board. 100 mm stroke, up to 0.079 m/s and a payload of up to 24 kg horizontal and 12 kg vertical, commissioning via IO-Link or directly on the unit.

Net
€972.46
excl. VAT
Item FES-8118268
Manufacturer no. EPCS-BS-32-100-3P-A-ST-M-H1-PLK-AA
Question about this item
  • Specialist dealer since 2009
  • Invoice payment for regular customers
  • Worldwide shipping
  • Technical questions clarified with the manufacturer

Description

The EPCS-BS-32-100-3P-A-ST-M-H1-PLK-AA is a ready-to-connect electric cylinder unit in size 32 with ball screw. Motor, encoder and controller sit inside the unit, so pressing, joining and positioning with high force need only two plug connections.

Benefits

  • Integrated drive: the EPCS-32 contains stepper motor, encoder with 16 bit resolution and controller, supplied with 24 V DC at 3 A nominal current.
  • Quick commissioning: set end positions and speed of the EPCS-32 on the user interface, then control via 2 digital inputs or IO-Link.
  • Repeatable: ±0.02 mm at up to 0.079 m/s and 1.5 m/s² acceleration.
  • Load capacity: feed force up to 150 N, reference payload 24 kg horizontal and 12 kg vertical, spindle pitch 3 mm/rev.
  • Cleanroom-suitable: the EPCS-32 meets Class 9 according to ISO 14644-1, degree of protection IP40, lifetime lubrication.

Applications

Typical applications for the EPCS-32 with 100 mm stroke are assembly, testing and packaging systems. The piston rod with male thread M8 takes tools or grippers directly. The EPCS-32 is rated for 0 to 50 °C ambient temperature, above 30 °C power must be reduced by 2 % per K.

Technical data

Size32
Stroke100 mm
Stroke reserve0 mm
Piston rod threadM8
Reversing backlash theoretical100 µm
Spindle diameter8 mm
Spindle pitch3 mm/rev
Torsional backlash at piston rod +/-1°
Mounting positionAny
Piston-rod endMale thread
Type of motorStepper motor
DesignWith ball screw, With integrated drive
Spindle typeBall screw
Protection against torque/guideWith plain-bearing guide
ReferencingPositive fixed stop block, Negative fixed stop block, Reference switch
Rotor position sensorAbsolute encoder, single turn
Rotor position sensor, encoder measuring principlemagnetic
Temperature monitoringSwitch-off for excessive temperature, Integrated precise CMOS temperature sensor with analogue output
Additional functionsBuilt-in end-position sensing
DisplayLED
Ready status indicationLED
Maximum acceleration1.5 m/s²
Maximum speed0.079 m/s
Speed "Speed press"0.01 m/s
Repetition accuracy±0.02 mm
Features of digital logic outputsConfigurable, Not galvanically isolated
Duty cycle100%
Insulation protection classB
Maximum current digital logic outputs100 mA
Maximum current consumption3000 mA
Maximum current consumption, logic0.3 A
Nominal voltage DC24 V
Nominal current3 A
Parameterisation interfaceIO-Link, User interface
Rotor position transducer resolution16 bit
Permissible voltage fluctuations+/- 15 %
Power supply, connection typePlug
power supply, connection systemM12x1, T-coded according to EN 61076-2-111
Power supply, number of pins/wires4
ApprovalRCM
KC markKC-EMV
CE mark (see declaration of conformity)To EU EMC Directive, In accordance with EU RoHS Directive
UKCA marking (see declaration of conformity)To UK RoHS instructions
Vibration resistanceTransport application test with severity level 1 to FN 942017-4 and EN 60068-2-6
Shock resistanceShock test with severity level 1 to FN 942017-5 and EN 60068-2-27
Corrosion resistance class CRC0 - No corrosion stress
LABS (PWIS) conformityVDMA24364 zone III
Cleanroom suitability, measured according to ISO 14644-14Class 9 according to ISO 14644-1
Storage temperature-20 to 60 °C
Relative air humidityNon-condensing
Degree of protectionIP40
Protection classIII
Ambient temperature0 to 50 °C
Note on ambient temperaturePower must be reduced by 2% per K at ambient temperatures above 30°C
Maximum moment Mx0 Nm
Maximum moment My1.5 Nm
Maximum moment Mz1.5 Nm
Maximum radial force at drive shaft75 N
Maximum feed force Fx150 N
Reference value effective load, horizontal24 kg
Reference value effective load, vertical12 kg
Maintenance intervalLifetime lubrication
Moving mass for 0 mm stroke98 g
Additional moving mass per 10 mm stroke3.3 g
Product weight1058 g
Basic weight for 0 mm stroke818 g
Additional weight per 10 mm stroke24 g
Number of digital logic outputs 24 V DC2
Number of digital logic inputs2
Specification logic inputBased on IEC 61131-2, type 1
Working range of logic input24 V
Features of logic inputConfigurable, Not galvanically isolated
IO-Link, SIO-Mode supportYes
IO-Link, Protocol versionDevice V 1.1
IO-Link, communication modeCOM3 (230.4 kBaud)
IO-Link, Port classA
IO-Link, Number of ports1
IO-Link, Process data length OUT2 bytes
IO-Link, Process data content OUTMove intermediate 1 bit
IO-Link, Process data length IN2 bytes
IO-Link, Process data content INState Device 1 bit, State In 1 bit, State Intermediate 1 bit, State Move 1 bit, State Out 1 bit
IO-Link, Service data IN32 bit Force, 32 bit position, 32 bit speed
IO-Link, Min, cycle time1 ms
IO-Link, Data storage required500 byte
Maximum cable length15 m outputs, 15 m inputs, 20 m with IO-Link operation
Switching logic for outputsNPN (negative switching), PNP (positive switching)
Switching logic for inputsNPN (negative switching), PNP (positive switching)
Logic interface, connection typePlug
Logic interface, connection technologyM12x1, A-coded according to EN 61076-2-101
Logic interface, number of pins/wires8
Type of mountingWith female thread, With accessories
Note on materialsRoHS compliant
Material housingSmooth-anodised wrought aluminium alloy
Material piston rodHigh-alloy stainless steel
Material ball screw nutSteel
Material spindleBearing steel
Weight1.2 kg
ManufacturerFesto
Hersteller-NrEPCS-BS-32-100-3P-A-ST-M-H1-PLK-AA
EAN4052568466046
Zolltarifnummer84798997
GPSR HerstellerdatenFesto Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com
ArtikelzustandNew
Artikel-AuthentizitätOriginal product
Stroke [mm]100
Operating voltage24 V DC
Protection ratingIP40
Temperaturbereich0-50 °C
Temperature (max.)50

Downloads

Questions about this item

Any other question?

Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.

Customers Who Bought This Item Also Bought