Images are examples, some edited with AI. The technical data are authoritative. AI notice
Electric cylinder ball screw size 60 stroke 500 mm EPCC-BS-60-500-5P-A - Festo 5428900
With a 500 mm stroke and ±0.02 mm repeatability, the electric cylinder EPCC-BS-60-500-5P-A handles exact positioning tasks. Ball screw with 5 mm pitch, feed force up to 1000 N and travel speed up to 0.25 m/s. Suitable for stepper and servo motors, degree of protection IP40.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
EPCC-BS-60-500-5P-A is a Festo electric cylinder with 500 mm stroke, size 60, up to 0.25 m/s. The ball screw with 5 mm/rev pitch generates up to 1000 N feed force at the piston rod (M12x1.25).
Advantages
- Repeatability of ±0.02 mm over the full 500 mm stroke.
- Feed force up to 1000 N in the direction of motion.
- Short cycles with up to 0.25 m/s and 5 m/s².
- Reference payload 120 kg horizontal and 60 kg vertical.
- Piston rod thread M12x1.25.
- Lifetime lubrication, no relubrication in operation.
Application
The electric cylinder EPCC-BS-60-500-5P-A replaces pneumatic cylinders where freely programmable positions and defined forces are needed over a 500 mm stroke. Mounting position any, ambient temperature 0 to 60 °C. Designed for mounting stepper and servo motors. Price-list weight 6 kg.
Technical data
| Type | EPCC-BS-60-500-5P-A |
|---|---|
| Size | 60 |
| Stroke | 500 mm |
| Stroke reserve | 0 mm |
| Piston rod thread | M12x1.25 |
| Reversing backlash theoretical | 100 µm |
| Spindle diameter | 12 mm |
| Spindle pitch | 5 mm/U |
| Torsional backlash at piston rod +/- | 1 deg |
| Mounting position | Any |
| Piston-rod end | Male thread |
| Type of motor | Stepper motor, servo motor |
| Position detection | Via proximity switch |
| Design | With ball screw |
| Spindle type | Ball screw |
| Protection against torque/guide | With plain-bearing guide |
| Maximum acceleration | 5 m/s² |
| Maximum rotational speed | 3000 1/min |
| Maximum speed | 0.25 m/s |
| Maximum homing speed | 0.01 m/s |
| Repetition accuracy | ±0.02 mm |
| Duty cycle | 100% |
| Corrosion resistance class CRC | 0 - No corrosion stress |
| LABS (PWIS) conformity | VDMA24364 zone III |
| Suitability for the production of Li-ion batteries | Suitable for battery production with reduced Cu/Zn/Ni values (F1a) |
| Cleanroom suitability, measured according to ISO 14644-14 | Class 9 according to ISO 14644-1 |
| Storage temperature | -20 to 60 °C |
| Relative air humidity | Non-condensing |
| Degree of protection | IP40 |
| Ambient temperature | 0 to 60 °C |
| Impact energy in end positions | 0.024 J |
| Maximum drive torque | 1.2 Nm |
| Maximum moment Mx | 0 Nm |
| Maximum moment My | 6.4 Nm |
| Maximum moment Mz | 6.4 Nm |
| Maximum radial force at drive shaft | 230 N |
| Maximum feed force Fx | 1000 N |
| Frictional torque independent of load | 0.235 Nm |
| Reference value effective load, horizontal | 120 kg |
| Reference value effective load, vertical | 60 kg |
| Mass moment of inertia JH per metre of stroke | 0.1195 kgcm² |
| Mass moment of inertia JL per kg of working load | 0.0063 kgcm² |
| Mass moment of inertia JO | 0.0682 kgcm² |
| Maintenance interval | Lifetime lubrication |
| Moving mass for 0 mm stroke | 305 g |
| Additional moving mass per 10 mm stroke | 6.5 g |
| Basic weight for 0 mm stroke | 1114 g |
| Additional weight per 10 mm stroke | 69 g |
| Type of mounting | With female thread, with accessories |
| Note on materials | RoHS compliant |
| Material housing | Smooth-anodised |
| Material piston rod | High-alloy stainless steel |
| Material ball screw nut | Steel |
| Material spindle | Bearing steel |
| Weight (price list) | 6 kg |
| Weight | 6 kg |
| Manufacturer | Festo |
| Hersteller-Nr | EPCC-BS-60-500-5P-A |
| EAN | 4052568452858 |
| Zolltarifnummer | 84799070 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Stroke [mm] | 500 |
| Protection rating | IP40 |
| Temperaturbereich | 0-60 °C |
| Temperature (max.) | 60 |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.






