Images are examples, some edited with AI. The technical data are authoritative. AI notice
Stepper motor 48 V, 6.6 Nm holding torque, multi-turn absolute encoder EMMT-ST-87-M-RM - Festo 8156193
Stepper motor EMMT-ST-87-M-RM for 48 V DC link voltage with 6.6 Nm holding torque and up to 6.8 Nm peak torque. A multi-turn absolute encoder with BiSS-C reports the rotor position at 17 bit. Motor housing and connector are rated IP65. It is connected via a hybrid plug M17x0.75 with 12 pins.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
For positioning drives at 48 V, the stepper motor EMMT-ST-87-M-RM offers 5.9 Nm continuous nominal torque and peaks up to 6.8 Nm.
Benefits
- Reserve for acceleration: peak torque 6.8 Nm at 5.9 Nm nominal torque
- Multi-turn absolute encoder: BiSS-C, 17 bit, 65536 revolutions absolute
- Connection: hybrid plug M17x0.75, 12 pins
- Degree of protection: IP40 at the shaft, IP65 for housing and connection components
- Step angle: 1.8° at full step
- Mass moment of inertia: 1.906 kgcm² total at output
Applications
Typical tasks are electric axes, rotary tables and toothed belt drives where 5.9 Nm nominal torque is sufficient.
Technical data
| Ambient temperature | -15 to 40 °C |
|---|---|
| Note on ambient temperature | Up to 80°C with derating -2%/°C |
| Maximum installation height | 4000 m |
| Note on maximum installation height | As of 1,000 m: only with derating of -1.0% per 100 m |
| Storage temperature | -20 to 70 °C |
| Relative air humidity | Non-condensing |
| Conforms to standard | IEC 60034 |
| Temperature class as per EN 60034-1 | B |
| Maximum winding temperature | 130 °C |
| Rating class as per EN 60034-1 | S1 |
| Temperature monitoring | Digital motor temperature transmission via BiSS-C |
| Motor type to EN 60034-7 | IM V1, IM V3 |
| Mounting position | Any |
| Degree of protection | IP40 |
| Note on degree of protection | IP40 motor shaft, IP65 for motor housing, including connection technology |
| Interface code, motor out | 87A |
| Electrical connection 1, connection type | Hybrid plug |
| Electrical connection 1, connector system | M17x0.75 |
| Electrical connection 1, number of connections/cores | 12 |
| Note on materials | RoHS compliant |
| Corrosion resistance class CRC | 0 - No corrosion stress |
| LABS (PWIS) conformity | VDMA24364 zone III |
| Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Approval | RCM, c UL us - Recognised (Oil) |
| CE mark (see declaration of conformity) | To EU EMC Directive, In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK RoHS instructions |
| Certificate issuing authority | UL E342973 |
| Nominal operating voltage DC | 48 V |
| Number of pole pairs | 50 |
| Motor holding torque | 6.6 Nm |
| Nominal torque | 5.9 Nm |
| Peak torque | 6.8 Nm |
| Nominal rotary speed | 140 1/min |
| Maximum rotational speed | 600 1/min |
| Maximum mechanical speed | 7000 1/min |
| Stepper angle for complete step | 1.8 deg |
| Stepping angle tolerance | ±5% |
| Nominal power rating of motor | 87 W |
| Continuous stall current | 8.2 A |
| Nominal motor current | 7.5 A |
| Peak current | 12 A |
| Motor constant | 0.79 Nm/A |
| Voltage constant, phase | 56.6 mVmin |
| Phase winding resistance | 0.27 Ohm |
| Phase winding inductance | 2.3 mH |
| Winding longitudinal inductivity Ld (phase) | 3.6 mH |
| Winding cross inductivity Lq (phase) | 2.3 mH |
| Electric time constant | 8.5 ms |
| Thermal time constant | 32 min |
| Thermal resistance | 0.83 K/W |
| Measuring flange | 250 x 250 x 15 mm, steel |
| Total mass moment of inertia of output | 1.906 kgcm² |
| Product weight | 3490 g |
| Permissible axial shaft load | 60 N |
| Permissible radial shaft load | 220 N |
| Rotor position sensor | Absolute encoder, multi-turn |
| rotor position sensor, manufacturer designation | KCD-BC33B-1617-U09C-JAQ-009 |
| rotor position sensor, absolute detectable revolutions | 65536 |
| Rotor position encoder interface | BiSS-C |
| Rotor position sensor, encoder measuring principle | magnetic |
| rotor position sensor, DC operating voltage | 14 V |
| rotor position sensor, DC operating voltage range | 4.75 to 15 V |
| Rotor position encoder, sine/cosine periods per revolution | 2 |
| rotor position sensor, position values per revolution | 131072 |
| Rotor position transducer resolution | 17 bit |
| rotor position sensor, system accuracy of angle measurement | -310 to 310 arcsec |
| Mean time to failure (MTTF), subcomponent | 20 years, rotor position encoder |
| Weight | 4.1 kg |
| Manufacturer | Festo |
| Hersteller-Nr | EMMT-ST-87-M-RM |
| EAN | 4052568639815 |
| Zolltarifnummer | 85015100 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Operating voltage | 48 V DC |
| Series | EMMT |
| Protection rating | IP40 |
| Temperature (max.) | 40 |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.







