Images are examples, some edited with AI. The technical data are authoritative. AI notice
Servo motor 6377 W, 45.5 Nm standstill torque, holding brake, multi-turn encoder EMMT-AS-150-LR-HS-R3MB - Festo 8148352
With 45.5 Nm standstill torque and 87 Nm peak torque, the Festo EMMT-AS-150-LR-HS-R3MB holds and accelerates loads precisely. Rated power 6377 W at 2100 1/min, designed for 680 V DC. A multi-turn absolute encoder (EnDat 22) captures the rotor position, the holding brake holds 65 Nm.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
29 Nm nominal torque at 2100 1/min: the Festo EMMT-AS-150-LR-HS-R3MB servo motor delivers 6377 W rated power to the axis. Total moment of inertia is 70.1 kgcm².
Benefits
- Peak torque 87 Nm for short cycles and acceleration phases
- Speed up to 3495 1/min, nominal speed 2100 1/min
- Multi-turn absolute encoder with 4096 absolute revolutions, no homing run after power-up
- Holding brake 65 Nm, operating voltage 24 V DC
- Cogging torque below 1.0 % of peak torque, smooth running even at low speeds
- Degree of protection IP21, ambient temperature -15 to 40 °C
Application
The EMMT-AS-150-LR-HS-R3MB drives linear axes, spindles and gear units. Permitted radial shaft load is 1370 N.
Technical data
| Type | EMMT-AS-150-LR-HS-R3MB |
|---|---|
| Festo part no. | 8148352 |
| Ambient temperature | -15 to 40 °C |
| Note on ambient temperature | Up to 80°C with derating of -1.5% per degree Celsius |
| Maximum installation height | 4000 m |
| Note on maximum installation height | As of 1,000 m: only with derating of -1.0% per 100 m |
| Storage temperature | -20 to 70 °C |
| Relative air humidity | 0 - 90% |
| Conforms to standard | IEC 60034 |
| Temperature class as per EN 60034-1 | F |
| Maximum winding temperature | 155 °C |
| Rating class as per EN 60034-1 | S1 |
| Temperature monitoring | Digital motor temperature transmission via EnDat® 2.2 |
| Motor type to EN 60034-7 | IM V1, IM V3 |
| Mounting position | Any |
| Degree of protection | IP21 |
| Note on degree of protection | IP67 for motor housing including connection components |
| Concentricity, coaxiality, axial runout to DIN SPEC 42955 | N |
| Balance quality | G 2.5 |
| Detent torque | <,1.0% of peak torque |
| Bearing lifetime under nominal conditions | 20000 h |
| Interface code, motor out | 150A |
| Electrical connection 1, connection type | Hybrid plug |
| Electrical connection 1, connector system | M40x1 |
| Electrical connection 1, number of connections/cores | 15 |
| Electrical connection 1, connection pattern | 00997380 |
| Pollution degree | 2 |
| Note on materials | RoHS compliant |
| Corrosion resistance class CRC | 0 - No corrosion stress |
| LABS (PWIS) conformity | VDMA24364 zone III |
| Vibration resistance | As per EN 60068-2-6 |
| Shock resistance | As per EN 60068-2-29, 15 g/11 ms to EN 60068-2-27 |
| Approval | RCM, c UL us - Recognized (OL) |
| CE mark (see declaration of conformity) | To EU EMC Directive, To EU Low Voltage Directive, In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK RoHS instructions, To UK regulations for electrical equipment |
| Certificate issuing authority | UL E342973 |
| Nominal operating voltage DC | 680 V |
| Type of winding switch | Star inside |
| Number of pole pairs | 5 |
| Standstill torque | 45.5 Nm |
| Nominal torque | 29 Nm |
| Peak torque | 87 Nm |
| Nominal rotary speed | 2100 1/min |
| Maximum rotational speed | 3495 1/min |
| Maximum mechanical speed | 8000 1/min |
| Angular acceleration | 100000 rad/s² |
| Nominal power rating of motor | 6377 W |
| Continuous stall current | 23.6 A |
| Nominal motor current | 15.4 A |
| Peak current | 49.5 A |
| Motor constant | 1.88 Nm/A |
| Standstill torque constant | 2.23 Nm/A |
| Voltage constant, phase-to-phase | 135.1 mVmin |
| Phase-phase winding resistance | 0.25 Ohm |
| Phase-phase winding inductance | 4.4 mH |
| Winding longitudinal inductivity Ld (phase) | 2.15 mH |
| Winding cross inductivity Lq (phase) | 2.2 mH |
| Electric time constant | 17.1 ms |
| Thermal time constant | 55 min |
| Thermal resistance | 0.39 K/W |
| Measuring flange | 450 x 450 x 30 mm, steel |
| Total mass moment of inertia of output | 70.1 kgcm² |
| Product weight | 29700 g |
| Permissible axial shaft load | 274 N |
| Permissible radial shaft load | 1370 N |
| Rotor position sensor | Absolute encoder, multi-turn |
| Rotor position sensor, manufacturer designation | EQI 1331 |
| Rotor position sensor, absolute detectable revolutions | 4096 |
| Rotor position encoder interface | EnDat 22 |
| Rotor position sensor, encoder measuring principle | Inductive |
| Rotor position sensor, DC operating voltage | 5 V |
| Rotor position sensor, DC operating voltage range | 3.6 to 14 V |
| Rotor position sensor, position values per revolution | 524288 |
| Rotor position transducer resolution | 19 bit |
| Rotor position sensor, system accuracy of angle measurement | -65 to 65 arcsec |
| Brake holding torque | 65 Nm |
| Operating voltage DC for brake | 24 V |
| Brake current consumption | 1.08 A |
| Power consumption, brake | 26 W |
| Brake separation time | 200 ms |
| Brake closing time | 40 ms |
| DC brake response delay | 10 ms |
| Maximum brake no-load speed | 8000 1/min |
| Maximum friction per braking process | 40000 J |
| Number of emergency stops per hour | 1 |
| Total brake friction | 4500 kJ |
| Mass moment of inertia of brake | 12.5 kgcm² |
| Switching cycles holding brake | 5 million idle actuations (without friction work) |
| Mean time to failure (MTTF), subcomponent | 190 years, rotor position encoder |
| Energy efficiency | ENEFF (CN) / Class 1 |
| Manufacturer | Festo |
| Hersteller-Nr | EMMT-AS-150-LR-HS-R3MB |
| EAN | 4052568591922 |
| Zolltarifnummer | 85015230 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Ausführung | Multiturn-Absolutwertgeber, mit Haltebremse |
| Norm | DIN EN 60034-1, DIN EN 60034-7, DIN EN 60034 |
| Series | EMMT |
| Protection rating | IP21 |
| Temperature (max.) | 40 |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.







