Images are examples, some edited with AI. The technical data are authoritative. AI notice
Servo motor 200 W, 0.7 Nm standstill torque, single-turn encoder EMMB-AS-60-02-S30S - Festo 8097171
With 0.7 Nm standstill torque and 1.92 Nm peak torque, the Festo EMMB-AS-60-02-S30S holds and accelerates loads precisely. Rated power 200 W at 3000 1/min, designed for 300 V DC. A single-turn absolute encoder (Nikon A-Format) captures the rotor position.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
Festo EMMB-AS-60-02-S30S servo motor: 200 W rated power, 0.64 Nm nominal torque, up to 1.92 Nm in peak operation. Total moment of inertia is 0.214 kgcm².
Benefits
- Peak torque 1.92 Nm for short cycles and acceleration phases
- Speed up to 6000 1/min, nominal speed 3000 1/min
- Single-turn absolute encoder with 20 bit resolution, Nikon A-Format interface
- Degree of protection IP65, ambient temperature -15 to 40 °C
Application
Typical uses are positioning axes, feed systems and pick-and-place units. Before mounting, match the interface and shaft loads of the EMMB-AS-60-02-S30S to the mechanics.
Technical data
| Type | EMMB-AS-60-02-S30S |
|---|---|
| Festo part no. | 8097171 |
| Weight | 1.2 kg |
| Ambient temperature | -15 to 40 °C |
| Note on ambient temperature | Up to 60°C with derating of -1.5% per degree Celsius |
| Maximum installation height | 4000 m |
| Note on maximum installation height | As of 1,000 m: only with derating of -1.0% per 100 m |
| Storage temperature | -20 to 55 °C |
| Relative air humidity | 0 - 90% |
| Conforms to standard | IEC 60034 |
| Temperature class as per EN 60034-1 | F |
| Maximum winding temperature | 155 °C |
| Rating class as per EN 60034-1 | S1 |
| Temperature monitoring | Digital motor temperature transmission via Nikon A format |
| Motor type to EN 60034-7 | IM V1, IM V3 |
| Mounting position | Any |
| Degree of protection | IP65 |
| Note on degree of protection | IP40 for motor shaft without rotary shaft seal, IP54 for motor shaft with rotary shaft seal, IP65 for motor housing without connection technology |
| Concentricity, coaxiality, axial runout to DIN SPEC 42955 | N |
| Balance quality | G 2.5 |
| Bearing lifetime under nominal conditions | 20000 h |
| Electrical connection 1, connection type | Plug |
| Electrical connection 1, connector system | Connection pattern RE |
| Electrical connection 1, number of connections/cores | 6 |
| Electrical connection 1, connection pattern | 00995792 |
| Pollution degree | 2 |
| Note on materials | RoHS compliant |
| Corrosion resistance class CRC | 0 - No corrosion stress |
| LABS (PWIS) conformity | VDMA24364 zone III |
| Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Approval | c UL us - Recognized (OL) |
| CE mark (see declaration of conformity) | To EU EMC Directive, To EU Low Voltage Directive, In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK RoHS instructions, To UK regulations for electrical equipment |
| Certificate issuing authority | UL E342973 |
| Nominal operating voltage DC | 300 V |
| Nominal voltage DC | 300 V |
| Type of winding switch | Star inside |
| Number of pole pairs | 3 |
| Standstill torque | 0.7 Nm |
| Nominal torque | 0.64 Nm |
| Peak torque | 1.92 Nm |
| Nominal rotary speed | 3000 1/min |
| Maximum rotational speed | 6000 1/min |
| Maximum mechanical speed | 10000 1/min |
| Nominal power rating of motor | 200 W |
| Continuous stall current | 1.5 A |
| Nominal motor current | 1.4 A |
| Peak current | 4.2 A |
| Motor constant | 0.48 Nm/A |
| Voltage constant, phase-to-phase | 29 mVmin |
| Phase-phase winding resistance | 11.2 Ohm |
| Phase-phase winding inductance | 20.9 mH |
| Electric time constant | 1.87 ms |
| Measuring flange | 255 x 255 x 8 mm, aluminium |
| Total mass moment of inertia of output | 0.214 kgcm² |
| Product weight | 1100 g |
| Permissible axial shaft load | 90 N |
| Permissible radial shaft load | 180 N |
| Rotor position sensor | Absolute encoder, single turn |
| Rotor position sensor, manufacturer designation | SAR-ML50AJC00 |
| Rotor position sensor, absolute detectable revolutions | 1 |
| Rotor position encoder interface | Nikon A-format |
| Rotor position sensor, encoder measuring principle | Optical |
| Rotor position sensor, DC operating voltage | 5 V |
| Rotor position sensor, DC operating voltage range | 4.75 to 5.25 V |
| Rotor position sensor, position values per revolution | 1048576 |
| Rotor position transducer resolution | 20 bit |
| Rotor position sensor, system accuracy of angle measurement | -120 to 120 arcsec |
| Manufacturer | Festo |
| Hersteller-Nr | EMMB-AS-60-02-S30S |
| EAN | 4052568458980 |
| Zolltarifnummer | 85015100 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Ausführung | Singleturn-Absolutwertgeber, ohne Haltebremse |
| Norm | DIN EN 60034-1, DIN EN 60034-7, DIN EN 60034 |
| Operating voltage | 300 V DC |
| Protection rating | IP65 |
| Temperature (max.) | 40 |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.







