Images are examples, some edited with AI. The technical data are authoritative. AI notice
Ball screw axis size 90 stroke 1000 mm pitch 20 mm ELGT-BS-90-1000-20P - Festo 8124435
The ball screw axis ELGT-BS-90-1000-20P travels at up to 1 m/s and accelerates at 15 m/s² over a working stroke of 1000 mm. Repetition accuracy is ±0.02 mm and feed force reaches up to 810 N. The ball screw with a 20 mm pitch turns every motor revolution into 20 mm of feed. Weight 14 kg.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
1000 mm of working stroke, up to 1 m/s and ±0.02 mm repetition accuracy: these are the key values of the Festo ball screw axis ELGT-BS-90-1000-20P in size 90.
Why this axis
- Up to 1 m/s travel speed and 15 m/s² acceleration for short cycle times
- Repetition accuracy of ±0.02 mm for reproducible positions
- Feed force up to 810 N
- Recirculating ball bearing guide for transverse forces up to 4710 N (Fy) and 5600 N (Fz) and moments up to 51 Nm (My)
- Spindle pitch of 20 mm/rev with a 15 mm spindle diameter for a defined feed per revolution
- Cleanroom suitable: Class 6 according to ISO 14644-1
Applications
Positioning and infeed tasks with 1000 mm of stroke where feed force and repeatability count, for example in assembly and test equipment. The ELGT-BS-90-1000-20P is designed for stepper and servo motors, its actuator interface code is T46. Any mounting position is possible.
Technical data
| Type | ELGT-BS-90-1000-20P |
|---|---|
| Festo part number | 8124435 |
| Working stroke | 1000 mm |
| Size | 90 |
| Stroke reserve | 0 mm |
| Reversing backlash, theoretical | 150 µm |
| Spindle diameter | 15 mm |
| Spindle pitch | 20 mm/U |
| Mounting position | Any |
| Guide | Recirculating ball bearing guide |
| Design | With ball screw |
| Type of motor | Stepper motor, Servo motor |
| Spindle type | Ball screw |
| Variants | Metals with copper, zinc or nickel by mass as main constituent are excluded from use, Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils |
| Maximum acceleration | 15 m/s² |
| Maximum rotational speed | 3000 1/min |
| Maximum speed | 1 m/s |
| Repetition accuracy | ±0.02 mm |
| Duty cycle | 100% |
| LABS (PWIS) conformity | VDMA24364 zone III |
| Suitability for the production of Li-ion batteries | Suitable for battery production with reduced Cu/Zn/Ni values (F1a) |
| Cleanroom suitability, measured according to ISO 14644-14 | Class 6 according to ISO 14644-1 |
| Degree of protection | IP20 |
| Ambient temperature | 0 to 50 °C |
| Continuous feed force | 810 N |
| 2nd moment of area Iy | 631000 mm⁴ |
| 2nd moment of area Iz | 1948000 mm⁴ |
| Idle torque at vmax | 0.2 Nm |
| Idle torque at vmin | 0.04 Nm |
| Maximum force Fy | 4710 N |
| Maximum force Fz | 5600 N |
| Fy at theoretical life value of 100 km (only guide consideration) | 17352 N |
| Fz at theoretical life value of 100 km (only guide consideration) | 20631 N |
| Maximum moment Mx | 65 Nm |
| Maximum moment My | 51 Nm |
| Maximum moment Mz | 51 Nm |
| Mx at theoretical life value of 100 km (only guide consideration) | 239 Nm |
| My at theoretical life value of 100 km (only guide consideration) | 188 Nm |
| Mz at theoretical life value of 100 km (only guide consideration) | 188 Nm |
| Maximum radial force at drive shaft | 290 N |
| Maximum feed force Fx | 810 N |
| Torsional mass moment of inertia It | 151000 mm⁴ |
| Mass moment of inertia JH per metre of stroke | 0.2522 kgcm² |
| Mass moment of inertia JL per kg of working load | 0.1013 kgcm² |
| Mass moment of inertia JO | 0.2291 kgcm² |
| Feed constant | 20 mm/U |
| Moving mass | 1645 g |
| Product weight | 14585 g |
| Basic weight for 0 mm stroke | 4353 g |
| Additional weight per 10 mm stroke | 104 g |
| Dynamic deflection (moving load) | 0.05% of the axis length, max, 0.5 mm |
| Static deflection (load in standstill) | 0.1% of the axis length |
| Interface code, actuator | T46 |
| Material end cap | Painted die cast aluminium |
| Material profile | Anodised wrought aluminium alloy |
| Note on materials | RoHS compliant |
| Material drive cover | Painted die cast aluminium |
| Material guide slide | Steel |
| Material guide rail | Steel |
| Material slide | Anodised wrought aluminium alloy |
| Material ball screw nut | Steel |
| Material spindle | Steel |
| Weight | 14 kg |
| Manufacturer | Festo |
| Hersteller-Nr | ELGT-BS-90-1000-20P |
| EAN | 4052568555054 |
| Zolltarifnummer | 84799070 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Stroke [mm] | 1000 |
| Housing material | Aluminium, anodised |
| Protection rating | IP20 |
| Temperaturbereich | 0-50 °C |
| Temperature (max.) | 50 |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.







