Images are examples, some edited with AI. The technical data are authoritative. AI notice
Ball screw axis size 160 stroke 550 mm pitch 20 mm ELGT-BS-160-550-20P - Festo 8124531
The ball screw axis ELGT-BS-160-550-20P travels at up to 1 m/s and accelerates at 15 m/s² over a working stroke of 550 mm. It positions with a repetition accuracy of ±0.02 mm and pushes with up to 1045 N. Per motor revolution the slide travels 20 mm via the ball screw. Festo part number 8124531.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The ball screw axis ELGT-BS-160-550-20P moves loads over 550 mm at up to 1 m/s and arrives repeatably with ±0.02 mm repetition accuracy.
Benefits
- Up to 1 m/s travel speed and 15 m/s² acceleration for short cycle times
- Repetition accuracy of ±0.02 mm for reproducible positions
- Feed force up to 1045 N
- Recirculating ball bearing guide for transverse forces up to 9550 N (Fy) and 11370 N (Fz) and moments up to 560 Nm (My)
- Spindle pitch of 20 mm/rev with a 20 mm spindle diameter for a defined feed per revolution
- Cleanroom suitable: Class 8 according to ISO 14644-1
Applications
Positioning and infeed tasks with 550 mm of stroke where feed force and repeatability count, for example in assembly and test equipment. Suitable drives are stepper and servo motors, with motor mounting to interface code T46 for the ELGT-BS-160-550-20P. Any mounting position is possible.
Technical data
| Type | ELGT-BS-160-550-20P |
|---|---|
| Festo part number | 8124531 |
| Working stroke | 550 mm |
| Size | 160 |
| Stroke reserve | 0 mm |
| Reversing backlash, theoretical | 150 µm |
| Spindle diameter | 20 mm |
| Spindle pitch | 20 mm/U |
| Mounting position | Any |
| Guide | Recirculating ball bearing guide |
| Design | With ball screw |
| Type of motor | Stepper motor, Servo motor |
| Spindle type | Ball screw |
| Variants | Metals with copper, zinc or nickel by mass as main constituent are excluded from use, Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils |
| Maximum acceleration | 15 m/s² |
| Maximum rotational speed | 3000 1/min |
| Maximum speed | 1 m/s |
| Repetition accuracy | ±0.02 mm |
| Duty cycle | 100% |
| LABS (PWIS) conformity | VDMA24364 zone III |
| Suitability for the production of Li-ion batteries | Suitable for battery production with reduced Cu/Zn/Ni values (F1a) |
| Cleanroom suitability, measured according to ISO 14644-14 | Class 8 according to ISO 14644-1 |
| Degree of protection | IP20 |
| Ambient temperature | 0 to 50 °C |
| Continuous feed force | 1045 N |
| 2nd moment of area Iy | 1411000 mm⁴ |
| 2nd moment of area Iz | 15257000 mm⁴ |
| Idle torque at vmax | 0.4 Nm |
| Idle torque at vmin | 0.14 Nm |
| Maximum force Fy | 9550 N |
| Maximum force Fz | 11370 N |
| Fy at theoretical life value of 100 km (only guide consideration) | 35183 N |
| Fz at theoretical life value of 100 km (only guide consideration) | 41887 N |
| Maximum moment Mx | 600 Nm |
| Maximum moment My | 560 Nm |
| Maximum moment Mz | 560 Nm |
| Mx at theoretical life value of 100 km (only guide consideration) | 2210 Nm |
| My at theoretical life value of 100 km (only guide consideration) | 2063 Nm |
| Mz at theoretical life value of 100 km (only guide consideration) | 2063 Nm |
| Maximum radial force at drive shaft | 290 N |
| Maximum feed force Fx | 1045 N |
| Torsional mass moment of inertia It | 726000 mm⁴ |
| Mass moment of inertia JH per metre of stroke | 0.9027 kgcm² |
| Mass moment of inertia JL per kg of working load | 0.1013 kgcm² |
| Mass moment of inertia JO | 0.6342 kgcm² |
| Feed constant | 20 mm/U |
| Moving mass | 3842 g |
| Product weight | 19978 g |
| Basic weight for 0 mm stroke | 9601 g |
| Additional weight per 10 mm stroke | 188 g |
| Dynamic deflection (moving load) | 0.05% of the axis length, max, 0.5 mm |
| Static deflection (load in standstill) | 0.1% of the axis length |
| Interface code, actuator | T46 |
| Material end cap | Painted die cast aluminium |
| Material profile | Anodised wrought aluminium alloy |
| Note on materials | RoHS compliant |
| Material drive cover | Painted die cast aluminium |
| Material guide slide | Steel |
| Material guide rail | Steel |
| Material slide | Anodised wrought aluminium alloy |
| Material ball screw nut | Steel |
| Material spindle | Steel |
| Manufacturer | Festo |
| Hersteller-Nr | ELGT-BS-160-550-20P |
| EAN | 4052568555504 |
| Zolltarifnummer | 84799070 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Housing material | Aluminium, anodised |
| Protection rating | IP20 |
| Temperaturbereich | 0-50 °C |
| Temperature (max.) | 50 |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.







