Images are examples, some edited with AI. The technical data are authoritative. AI notice
Toothed belt axis stroke 1800 mm up to 3 m/s ELGD-TB-KF-WD-100-1800-0H-L-PU2 - Festo 8192382
The toothed belt axis ELGD-TB-KF-WD-100-1800-0H-L-PU2 positions over an 1800 mm stroke with a repeatability of ±0.04 mm. Toothed belt with 3 mm pitch and 84 mm/U feed constant, feed force up to 240 N and travel speed up to 3 m/s. Suitable for stepper and servo motors, degree of protection IP40.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
ELGD-TB-KF-WD-100-1800-0H-L-PU2 is a Festo toothed belt axis with 1800 mm stroke, size 100, up to 3 m/s. The toothed belt with 3 mm pitch delivers 84 mm feed per revolution, allowing speeds up to 3 m/s at 100 m/s² acceleration.
Advantages
- Reproducible end positions with ±0.04 mm repeatability.
- Short cycles with up to 3 m/s and 100 m/s².
- Feed force up to 240 N in the direction of motion.
- Recirculating ball bearing guide for transverse forces up to 4376 N and moments up to 130 Nm.
- Lifetime lubrication, reference service life 5000 km.
- Cleanroom class 6 to ISO 14644-1 (extraction: class 4).
Application
In gantries and transfer units the toothed belt axis ELGD-TB-KF-WD-100-1800-0H-L-PU2 covers its 1800 mm stroke with high dynamics. Mounting position any, ambient temperature 0 to 60 °C. Designed for mounting stepper and servo motors. Price-list weight 1 kg.
Technical data
| Type | ELGD-TB-KF-WD-100-1800-0H-L-PU2 |
|---|---|
| Effective diameter of drive pinion | 26.74 mm |
| Working stroke | 1800 mm |
| Size | 100 |
| Stroke reserve | 0 mm |
| Toothed-belt pitch | 3 mm |
| Mounting position | Any |
| Guide | Recirculating ball bearing guide |
| Design | With toothed belt |
| Type of motor | Stepper motor, servo motor |
| Functional principle of measuring system | Incremental |
| Position detection | For inductive sensors |
| Maximum acceleration | 100 m/s² |
| Maximum speed | 3 m/s |
| Repetition accuracy | ±0.04 mm |
| Duty cycle | 100% |
| LABS (PWIS) conformity | VDMA24364-C1-L |
| Suitability for the production of Li-ion batteries | Suitable for battery production with reduced Cu/Zn/Ni values (F1a) |
| Cleanroom suitability, measured according to ISO 14644-14 | Class 4 according to ISO 14644-1 (with vacuum extraction), class 6 according to ISO 14644-1 |
| Storage temperature | -20 to 60 °C |
| Degree of protection | IP40 |
| Ambient temperature | 0 to 60 °C |
| Impact energy in end positions | 0.00075 J |
| Note on the impact energy in the end positions | At maximum homing speed of 0.01 m/s |
| 2nd moment of area Iy | 347100 mm⁴ |
| 2nd moment of area Iz | 2268000 mm⁴ |
| Maximum drive torque | 3.2 Nm |
| Maximum force Fy | 4376 N |
| Maximum force Fz | 4286 N |
| Maximum force Fy total axis | 4092 N |
| Maximum force Fz total axis | 2250 N |
| Fy at theoretical life value of 100 km (only guide consideration) | 18415 N |
| Fz at theoretical life value of 100 km (only guide consideration) | 18415 N |
| Maximum idle running transfer resistance | 29.9 N |
| Maximum moment Mx | 130 Nm |
| Maximum moment My | 200 Nm |
| Maximum moment Mz | 200 Nm |
| Maximum moment Mx total axis | 150 Nm |
| Maximum moment My total axis | 191 Nm |
| Maximum moment Mz total axis | 270 Nm |
| Mx at theoretical life value of 100 km (only guide consideration) | 645 Nm |
| My at theoretical life value of 100 km (only guide consideration) | 720 Nm |
| Mz at theoretical life value of 100 km (only guide consideration) | 720 Nm |
| Distance between slide surface and guide centre | 47 mm |
| Maximum feed force Fx | 240 N |
| Frictional torque independent of load | 0.4 Nm |
| Torsional mass moment of inertia It | 108900 mm⁴ |
| Mass moment of inertia JH per metre of stroke | 0.2252 kgcm² |
| Mass moment of inertia JL per kg of working load | 1.7876 kgcm² |
| Mass moment of inertia JO | 2.9542 kgcm² |
| Feed constant | 84 mm/U |
| Reference service life | 5000 km |
| Maintenance interval | Lifetime lubrication |
| Moving mass | 1337 g |
| Product weight | 13764 g |
| Basic weight for 0 mm stroke | 3864 g |
| Additional weight per 10 mm stroke | 55 g |
| Dynamic deflection (moving load) | 0.05% of the axis length, maximum 0.5 mm |
| Static deflection (load in standstill) | 0.1% of the axis length |
| Interface code, actuator | L38 |
| Material end cap | Aluminium gravity die-cast, painted |
| Material profile | Anodised wrought aluminium alloy |
| Note on materials | RoHS compliant |
| Material cover tape | High-alloy stainless steel |
| Material drive cover | Aluminium gravity die-cast, painted |
| Material guide slide | Steel |
| Material guide rail | Steel |
| Material pulleys | High-alloy stainless steel |
| Material slide | Wrought aluminium alloy |
| Material toothed belt | Polyurethane with steel cord |
| Weight (price list) | 1 kg |
| Weight | 1 kg |
| Manufacturer | Festo |
| Hersteller-Nr | ELGD-TB-KF-WD-100-1800-0H-L-PU2 |
| EAN | 4052568645182 |
| Zolltarifnummer | 84799070 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Stroke [mm] | 1800 |
| Housing material | Aluminium, anodised |
| Protection rating | IP40 |
| Temperaturbereich | 0-60 °C |
| Temperature (max.) | 60 |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.







