Images are examples, some edited with AI. The technical data are authoritative. AI notice
Ball screw axis size 120 stroke 1000 mm pitch 20 mm ELGT-BS-120-1000-20P - Festo 8124508
Up to 1 m/s travel speed and 15 m/s² acceleration: the Festo ball screw axis ELGT-BS-120-1000-20P covers a working stroke of 1000 mm in size 120. It positions with a repetition accuracy of ±0.02 mm and pushes with up to 805 N. Per motor revolution the slide travels 20 mm via the ball screw.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
1000 mm of working stroke, up to 1 m/s and ±0.02 mm repetition accuracy: these are the key values of the Festo ball screw axis ELGT-BS-120-1000-20P in size 120.
Why this axis
- Up to 1 m/s travel speed and 15 m/s² acceleration for short cycle times
- Repetition accuracy of ±0.02 mm for reproducible positions
- Feed force up to 805 N
- Recirculating ball bearing guide for transverse forces up to 6800 N (Fy) and 8090 N (Fz) and moments up to 310 Nm (My)
- Spindle pitch of 20 mm/rev with a 15 mm spindle diameter for a defined feed per revolution
- Cleanroom suitable: Class 8 according to ISO 14644-1
Applications
The ball screw suits accurate approach of intermediate positions over 1000 mm, for example in joining, dosing or testing. Suitable drives are stepper and servo motors, with motor mounting to interface code T46 for the ELGT-BS-120-1000-20P. Any mounting position is possible.
Technical data
| Type | ELGT-BS-120-1000-20P |
|---|---|
| Festo part number | 8124508 |
| Working stroke | 1000 mm |
| Size | 120 |
| Stroke reserve | 0 mm |
| Reversing backlash, theoretical | 150 µm |
| Spindle diameter | 15 mm |
| Spindle pitch | 20 mm/U |
| Mounting position | Any |
| Guide | Recirculating ball bearing guide |
| Design | With ball screw |
| Type of motor | Stepper motor, Servo motor |
| Spindle type | Ball screw |
| Variants | Metals with copper, zinc or nickel by mass as main constituent are excluded from use, Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils |
| Maximum acceleration | 15 m/s² |
| Maximum rotational speed | 3000 1/min |
| Maximum speed | 1 m/s |
| Repetition accuracy | ±0.02 mm |
| Duty cycle | 100% |
| LABS (PWIS) conformity | VDMA24364 zone III |
| Suitability for the production of Li-ion batteries | Suitable for battery production with reduced Cu/Zn/Ni values (F1a) |
| Cleanroom suitability, measured according to ISO 14644-14 | Class 8 according to ISO 14644-1 |
| Degree of protection | IP20 |
| Ambient temperature | 0 to 50 °C |
| Continuous feed force | 805 N |
| 2nd moment of area Iy | 966000 mm⁴ |
| 2nd moment of area Iz | 6011000 mm⁴ |
| Idle torque at vmax | 0.3 Nm |
| Idle torque at vmin | 0.08 Nm |
| Maximum force Fy | 6800 N |
| Maximum force Fz | 8090 N |
| Fy at theoretical life value of 100 km (only guide consideration) | 25051 N |
| Fz at theoretical life value of 100 km (only guide consideration) | 29804 N |
| Maximum moment Mx | 300 Nm |
| Maximum moment My | 310 Nm |
| Maximum moment Mz | 310 Nm |
| Mx at theoretical life value of 100 km (only guide consideration) | 1105 Nm |
| My at theoretical life value of 100 km (only guide consideration) | 1142 Nm |
| Mz at theoretical life value of 100 km (only guide consideration) | 1142 Nm |
| Maximum radial force at drive shaft | 290 N |
| Maximum feed force Fx | 805 N |
| Torsional mass moment of inertia It | 506000 mm⁴ |
| Mass moment of inertia JH per metre of stroke | 0.2522 kgcm² |
| Mass moment of inertia JL per kg of working load | 0.1013 kgcm² |
| Mass moment of inertia JO | 0.2654 kgcm² |
| Feed constant | 20 mm/U |
| Moving mass | 2036 g |
| Product weight | 17427 g |
| Basic weight for 0 mm stroke | 5235 g |
| Additional weight per 10 mm stroke | 124 g |
| Dynamic deflection (moving load) | 0.05% of the axis length, max, 0.5 mm |
| Static deflection (load in standstill) | 0.1% of the axis length |
| Interface code, actuator | T46 |
| Material end cap | Painted die cast aluminium |
| Material profile | Anodised wrought aluminium alloy |
| Note on materials | RoHS compliant |
| Material drive cover | Painted die cast aluminium |
| Material guide slide | Steel |
| Material guide rail | Steel |
| Material slide | Anodised wrought aluminium alloy |
| Material ball screw nut | Steel |
| Material spindle | Steel |
| Weight | 30 kg |
| Manufacturer | Festo |
| Hersteller-Nr | ELGT-BS-120-1000-20P |
| EAN | 4052568555313 |
| Zolltarifnummer | 84799070 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Stroke [mm] | 1000 |
| Housing material | Aluminium, anodised |
| Protection rating | IP20 |
| Temperaturbereich | 0-50 °C |
| Temperature (max.) | 50 |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.







