Images are examples, some edited with AI. The technical data are authoritative. AI notice

Ball screw axis size 120 stroke 500 mm pitch 5 mm ELGD-BS-KF-120-500-0H-5P - Festo 8192294

Festo ✓ Original product Brand new

Over a working stroke of 500 mm, the ball screw axis ELGD-BS-KF-120-500-0H-5P positions loads in size 120 at up to 0.27 m/s. 3520 N of feed force and ±0.01 mm repetition accuracy make the movement strong and repeatable. Per motor revolution the slide travels 5 mm via the ball screw. Weight 13 kg.

Net
€2,307.91
excl. VAT
Item FES-8192294
Manufacturer no. ELGD-BS-KF-120-500-0H-5P
Question about this item
  • Specialist dealer since 2009
  • Invoice payment for regular customers
  • Worldwide shipping
  • Technical questions clarified with the manufacturer

Description

For 500 mm of stroke travelled repeatably, the ball screw axis ELGD-BS-KF-120-500-0H-5P provides up to 0.27 m/s at ±0.01 mm repetition accuracy.

Your benefits

  • Up to 0.27 m/s travel speed and 15 m/s² acceleration for short cycle times
  • Repetition accuracy of ±0.01 mm for reproducible positions
  • Feed force up to 3520 N
  • Recirculating ball bearing guide for transverse forces up to 4300 N (Fy) and 4300 N (Fz) and moments up to 50 Nm (My)
  • Spindle pitch of 5 mm/rev with a 25 mm spindle diameter for a defined feed per revolution
  • Cleanroom suitable: Class 4 according to ISO 14644-1 (with vacuum extraction), Class 7 according to ISO 14644-1

Applications

The ball screw suits accurate approach of intermediate positions over 500 mm, for example in joining, dosing or testing. Suitable drives are stepper and servo motors, with motor mounting to interface code S60 for the ELGD-BS-KF-120-500-0H-5P. Any mounting position is possible.

Technical data

TypeELGD-BS-KF-120-500-0H-5P
Festo part number8192294
Working stroke500 mm
Size120
Stroke reserve0 mm
Ball screw reversing backlash±0.02 mm
Spindle diameter25 mm
Spindle pitch5 mm/U
Mounting positionAny
GuideRecirculating ball bearing guide
DesignWith ball screw
Type of motorStepper motor, Servo motor
Spindle typeBall screw
Functional principle of measuring systemIncremental
Position detectionFor inductive sensors
Maximum acceleration15 m/s²
Maximum rotational speed3200 1/min
Maximum speed0.27 m/s
Repetition accuracy±0.01 mm
Duty cycle100%
LABS (PWIS) conformityVDMA24364-C1-L
Suitability for the production of Li-ion batteriesSuitable for battery production with reduced Cu/Zn/Ni values (F1a)
Cleanroom suitability, measured according to ISO 14644-14Class 4 according to ISO 14644-1 (with vacuum extraction), Class 7 according to ISO 14644-1
Storage temperature-20 to 60 °C
Degree of protectionIP40
Ambient temperature0 to 60 °C
Impact energy in end positions0.001 J
Note on the impact energy in the end positionsAt maximum homing speed of 0.01 m/s
2nd moment of area Iy3550000 mm⁴
2nd moment of area Iz8985000 mm⁴
Idle torque at vmax0.344 Nm
Idle torque at vmin0.167 Nm
Maximum force Fy4300 N
Maximum force Fz4300 N
Maximum force Fy total axis2957 N
Maximum force Fz total axis5608 N
Fy at theoretical life value of 100 km (only guide consideration)17576 N
Fz at theoretical life value of 100 km (only guide consideration)17576 N
Maximum moment Mx170 Nm
Maximum moment My50 Nm
Maximum moment Mz60 Nm
Maximum moment Mx total axis202 Nm
Maximum moment My total axis80 Nm
Maximum moment Mz total axis95 Nm
Mx at theoretical life value of 100 km (only guide consideration)730 Nm
My at theoretical life value of 100 km (only guide consideration)162 Nm
Mz at theoretical life value of 100 km (only guide consideration)162 Nm
Distance between slide surface and guide centre80 mm
Maximum radial force at drive shaft750 N
Maximum feed force Fx3520 N
Torsional mass moment of inertia It1433600 mm⁴
Mass moment of inertia JH per metre of stroke2.633 kgcm²
Mass moment of inertia JL per kg of working load0.00633 kgcm²
Mass moment of inertia JO0.76031 kgcm²
Feed constant5 mm/U
Reference service life5000 km
Maintenance intervalLifetime lubrication
Moving mass1725 g
Product weight13437 g
Basic weight for 0 mm stroke6087 g
Additional weight per 10 mm stroke147 g
Dynamic deflection (moving load)0.05% of the axis length, max, 0.5 mm
Static deflection (load in standstill)0.1% of the axis length
Interface code, actuatorS60
Material end capAluminium gravity die-cast, painted
Material profileAnodised wrought aluminium alloy
Note on materialsRoHS compliant
Material cover tapeHigh-alloy stainless steel
Material drive coverAluminium gravity die-cast, painted
Material guide slideSteel
Material guide railSteel
Material slideWrought aluminium alloy
Material ball screw nutSteel
Material spindleSteel
Weight13 kg
ManufacturerFesto
Hersteller-NrELGD-BS-KF-120-500-0H-5P
EAN4052568775537
Zolltarifnummer84799070
GPSR HerstellerdatenFesto Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com
ArtikelzustandNew
Artikel-AuthentizitätOriginal product
Stroke [mm]500
Housing materialAluminium, anodised
Protection ratingIP40
Temperaturbereich0-60 °C
Temperature (max.)60

Downloads

Questions about this item

Any other question?

Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.

Customers Who Bought This Item Also Bought