Images are examples, some edited with AI. The technical data are authoritative. AI notice
Ball screw axis stroke 500 mm pitch 10 mm ELGD-BS-KF-WD-120-500-0H-10P-L - Festo 8192340
With a 500 mm stroke and ±0.01 mm repeatability, the ball screw axis ELGD-BS-KF-WD-120-500-0H-10P-L handles exact positioning tasks. Ball screw with 10 mm pitch, feed force up to 1880 N and travel speed up to 0.41 m/s. Suitable for stepper and servo motors, degree of protection IP40.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
ELGD-BS-KF-WD-120-500-0H-10P-L is a Festo ball screw axis with 500 mm stroke, size 120, up to 0.41 m/s. The ball screw with 10 mm/rev pitch converts motor torque into up to 1880 N feed force, while the recirculating ball bearing guide carries transverse forces up to 8000 N.
Advantages
- Reproducible end positions with ±0.01 mm repeatability.
- Feed force up to 1880 N in the direction of motion.
- Up to 0.41 m/s and 15 m/s² acceleration for short cycle times.
- Transverse forces up to 8000 N and moments up to 330 Nm via the recirculating ball bearing guide.
- Lifetime lubrication, reference service life 5000 km.
- Cleanroom class 7 to ISO 14644-1 (extraction: class 4).
Application
The ball screw axis ELGD-BS-KF-WD-120-500-0H-10P-L fits gantries, joining and test stations that require exact positioning over a 500 mm stroke. Mounting position any, ambient temperature 0 to 60 °C. Designed for mounting stepper and servo motors.
Technical data
| Type | ELGD-BS-KF-WD-120-500-0H-10P-L |
|---|---|
| Working stroke | 500 mm |
| Size | 120 |
| Stroke reserve | 0 mm |
| Ball screw reversing backlash | ±0.02 mm |
| Spindle diameter | 12 mm |
| Spindle pitch | 10 mm/U |
| Mounting position | Any |
| Guide | Recirculating ball bearing guide |
| Design | With ball screw |
| Type of motor | Stepper motor, servo motor |
| Spindle type | Ball screw |
| Functional principle of measuring system | Incremental |
| Position detection | For inductive sensors |
| Maximum acceleration | 15 m/s² |
| Maximum rotational speed | 2435 1/min |
| Maximum speed | 0.41 m/s |
| Repetition accuracy | ±0.01 mm |
| Duty cycle | 100% |
| LABS (PWIS) conformity | VDMA24364-C1-L |
| Suitability for the production of Li-ion batteries | Suitable for battery production with reduced Cu/Zn/Ni values (F1a) |
| Cleanroom suitability, measured according to ISO 14644-14 | Class 4 according to ISO 14644-1 (with vacuum extraction), class 7 according to ISO 14644-1 |
| Storage temperature | -20 to 60 °C |
| Degree of protection | IP40 |
| Ambient temperature | 0 to 60 °C |
| Impact energy in end positions | 0.001 J |
| Note on the impact energy in the end positions | At maximum homing speed of 0.01 m/s |
| 2nd moment of area Iy | 770900 mm⁴ |
| 2nd moment of area Iz | 5801000 mm⁴ |
| Idle torque at vmax | 0.246 Nm |
| Idle torque at vmin | 0.068 Nm |
| Maximum force Fy | 8000 N |
| Maximum force Fz | 7200 N |
| Maximum force Fy total axis | 5914 N |
| Maximum force Fz total axis | 5280 N |
| Fy at theoretical life value of 100 km (only guide consideration) | 35153 N |
| Fz at theoretical life value of 100 km (only guide consideration) | 35153 N |
| Maximum moment Mx | 330 Nm |
| Maximum moment My | 600 Nm |
| Maximum moment Mz | 540 Nm |
| Maximum moment Mx total axis | 290 Nm |
| Maximum moment My total axis | 590 Nm |
| Maximum moment Mz total axis | 527 Nm |
| Mx at theoretical life value of 100 km (only guide consideration) | 1459 Nm |
| My at theoretical life value of 100 km (only guide consideration) | 1920 Nm |
| Mz at theoretical life value of 100 km (only guide consideration) | 1920 Nm |
| Distance between slide surface and guide centre | 51 mm |
| Maximum radial force at drive shaft | 230 N |
| Maximum feed force Fx | 1880 N |
| Torsional mass moment of inertia It | 383100 mm⁴ |
| Mass moment of inertia JH per metre of stroke | 0.13 kgcm² |
| Mass moment of inertia JL per kg of working load | 0.02533 kgcm² |
| Mass moment of inertia JO | 0.0947 kgcm² |
| Feed constant | 10 mm/U |
| Reference service life | 5000 km |
| Maintenance interval | Lifetime lubrication |
| Moving mass | 2352 g |
| Product weight | 9590 g |
| Basic weight for 0 mm stroke | 5290 g |
| Additional weight per 10 mm stroke | 86 g |
| Dynamic deflection (moving load) | 0.05% of the axis length, maximum 0.5 mm |
| Static deflection (load in standstill) | 0.1% of the axis length |
| Interface code, actuator | T42 |
| Material end cap | Aluminium gravity die-cast, painted |
| Material profile | Anodised wrought aluminium alloy |
| Note on materials | RoHS compliant |
| Material cover tape | High-alloy stainless steel |
| Material drive cover | Aluminium gravity die-cast, painted |
| Material guide slide | Steel |
| Material guide rail | Steel |
| Material slide | Wrought aluminium alloy |
| Material ball screw nut | Steel |
| Material spindle | Steel |
| Manufacturer | Festo |
| Hersteller-Nr | ELGD-BS-KF-WD-120-500-0H-10P-L |
| EAN | 4052568775919 |
| Zolltarifnummer | 84799070 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Stroke [mm] | 500 |
| Housing material | Aluminium, anodised |
| Protection rating | IP40 |
| Temperaturbereich | 0-60 °C |
| Temperature (max.) | 60 |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.







