Images are examples, some edited with AI. The technical data are authoritative. AI notice
Ball screw axis size 120 stroke 300 mm pitch 5 mm ELGD-BS-KF-120-300-0H-5P - Festo 8192292
The ball screw axis ELGD-BS-KF-120-300-0H-5P travels at up to 0.27 m/s and accelerates at 15 m/s² over a working stroke of 300 mm. Repetition accuracy is ±0.01 mm and feed force reaches up to 3520 N. Per motor revolution the slide travels 5 mm via the ball screw. Weight 10 kg.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The ball screw axis ELGD-BS-KF-120-300-0H-5P moves loads over 300 mm at up to 0.27 m/s and arrives repeatably with ±0.01 mm repetition accuracy.
Benefits
- Up to 0.27 m/s travel speed and 15 m/s² acceleration for short cycle times
- Repetition accuracy of ±0.01 mm for reproducible positions
- Feed force up to 3520 N
- Recirculating ball bearing guide for transverse forces up to 4300 N (Fy) and 4300 N (Fz) and moments up to 50 Nm (My)
- Spindle pitch of 5 mm/rev with a 25 mm spindle diameter for a defined feed per revolution
- Cleanroom suitable: Class 4 according to ISO 14644-1 (with vacuum extraction), Class 7 according to ISO 14644-1
Applications
Positioning and infeed tasks with 300 mm of stroke where feed force and repeatability count, for example in assembly and test equipment. Suitable drives are stepper and servo motors, with motor mounting to interface code S60 for the ELGD-BS-KF-120-300-0H-5P. Any mounting position is possible.
Technical data
| Type | ELGD-BS-KF-120-300-0H-5P |
|---|---|
| Festo part number | 8192292 |
| Working stroke | 300 mm |
| Size | 120 |
| Stroke reserve | 0 mm |
| Ball screw reversing backlash | ±0.02 mm |
| Spindle diameter | 25 mm |
| Spindle pitch | 5 mm/U |
| Mounting position | Any |
| Guide | Recirculating ball bearing guide |
| Design | With ball screw |
| Type of motor | Stepper motor, Servo motor |
| Spindle type | Ball screw |
| Functional principle of measuring system | Incremental |
| Position detection | For inductive sensors |
| Maximum acceleration | 15 m/s² |
| Maximum rotational speed | 3200 1/min |
| Maximum speed | 0.27 m/s |
| Repetition accuracy | ±0.01 mm |
| Duty cycle | 100% |
| LABS (PWIS) conformity | VDMA24364-C1-L |
| Suitability for the production of Li-ion batteries | Suitable for battery production with reduced Cu/Zn/Ni values (F1a) |
| Cleanroom suitability, measured according to ISO 14644-14 | Class 4 according to ISO 14644-1 (with vacuum extraction), Class 7 according to ISO 14644-1 |
| Storage temperature | -20 to 60 °C |
| Degree of protection | IP40 |
| Ambient temperature | 0 to 60 °C |
| Impact energy in end positions | 0.001 J |
| Note on the impact energy in the end positions | At maximum homing speed of 0.01 m/s |
| 2nd moment of area Iy | 3550000 mm⁴ |
| 2nd moment of area Iz | 8985000 mm⁴ |
| Idle torque at vmax | 0.344 Nm |
| Idle torque at vmin | 0.167 Nm |
| Maximum force Fy | 4300 N |
| Maximum force Fz | 4300 N |
| Maximum force Fy total axis | 2957 N |
| Maximum force Fz total axis | 5608 N |
| Fy at theoretical life value of 100 km (only guide consideration) | 17576 N |
| Fz at theoretical life value of 100 km (only guide consideration) | 17576 N |
| Maximum moment Mx | 170 Nm |
| Maximum moment My | 50 Nm |
| Maximum moment Mz | 60 Nm |
| Maximum moment Mx total axis | 202 Nm |
| Maximum moment My total axis | 80 Nm |
| Maximum moment Mz total axis | 95 Nm |
| Mx at theoretical life value of 100 km (only guide consideration) | 730 Nm |
| My at theoretical life value of 100 km (only guide consideration) | 162 Nm |
| Mz at theoretical life value of 100 km (only guide consideration) | 162 Nm |
| Distance between slide surface and guide centre | 80 mm |
| Maximum radial force at drive shaft | 750 N |
| Maximum feed force Fx | 3520 N |
| Torsional mass moment of inertia It | 1433600 mm⁴ |
| Mass moment of inertia JH per metre of stroke | 2.633 kgcm² |
| Mass moment of inertia JL per kg of working load | 0.00633 kgcm² |
| Mass moment of inertia JO | 0.76031 kgcm² |
| Feed constant | 5 mm/U |
| Reference service life | 5000 km |
| Maintenance interval | Lifetime lubrication |
| Moving mass | 1725 g |
| Product weight | 10497 g |
| Basic weight for 0 mm stroke | 6087 g |
| Additional weight per 10 mm stroke | 147 g |
| Dynamic deflection (moving load) | 0.05% of the axis length, max, 0.5 mm |
| Static deflection (load in standstill) | 0.1% of the axis length |
| Interface code, actuator | S60 |
| Material end cap | Aluminium gravity die-cast, painted |
| Material profile | Anodised wrought aluminium alloy |
| Note on materials | RoHS compliant |
| Material cover tape | High-alloy stainless steel |
| Material drive cover | Aluminium gravity die-cast, painted |
| Material guide slide | Steel |
| Material guide rail | Steel |
| Material slide | Wrought aluminium alloy |
| Material ball screw nut | Steel |
| Material spindle | Steel |
| Weight | 10 kg |
| Manufacturer | Festo |
| Hersteller-Nr | ELGD-BS-KF-120-300-0H-5P |
| EAN | 4052568775513 |
| Zolltarifnummer | 84799070 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Stroke [mm] | 300 |
| Housing material | Aluminium, anodised |
| Protection rating | IP40 |
| Temperaturbereich | 0-60 °C |
| Temperature (max.) | 60 |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.







