Adjustable T connector with cone, tube 35 L, stainless steel 1.4571

In use, the adjustable T connector splits a line into two paths and joins the tube to a tube stud with a sealing cone and an O-ring. This version is listed with tube stud 35 L and tube connection 35 L (M45x2). Its rating is a working pressure of 160 bar. In addition the data give light series.

Benefits

• The tee branches the line off without needing a second port on the device.
• The branch can be set to any direction before it is locked, so tube 35 L (M45x2) stays free of stress.
• Sealing cone with an O-ring at tube stud 35 L for a soft joint that can be undone repeatedly.
• Working pressure up to 160 bar in the light series.
• Temperature range -20 to +200 °C for the body in stainless steel 1.4571.

Applications

At tube stud 35 L of a plant of the light series the branch sits where a further circuit is to be connected later.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.