Adjustable T connector with cone, tube 22 L, stainless steel 1.4571

Once installed, the adjustable T connector splits a line into two paths and joins the tube to a tube stud with a sealing cone and an O-ring. It is produced from stainless steel 1.4571. The data give tube stud 22 L and tube connection 22 L (M30x2). In addition the data give light series.

Benefits

• The tee branches the line off without needing a second port on the device.
• The branch can be set to any direction before it is locked, so tube 22 L (M30x2) stays free of stress.
• Sealing cone with an O-ring at tube stud 22 L for a soft joint that can be undone repeatedly.
• Working pressure up to 160 bar in the light series.
• Temperature range -20 to +200 °C for the body in stainless steel 1.4571.

Technical data

Applications

When splitting a flow between two consumers the version in stainless steel 1.4571 holds 160 bar on both paths.

Standards and conformity

The coupling belongs to the cutting ring system for precision tubes. The tube is cut off square, deburred inside and out and cleaned, and no tube cutter is used.