Adjustable T connector with cone, tube 14 S, zinc-plated steel

This adjustable T connector splits a line into two paths and joins the tube to a tube stud with a sealing cone and an O-ring. The article is listed with a working pressure of 630 bar. This version is listed with tube stud 14 S and tube connection 14 S (M22x1.5). The stated material is zinc-plated steel. This version is supplied with heavy series.

Benefits

• The tee branches the line off without needing a second port on the device.
• The branch can be set to any direction before it is locked, so tube 14 S (M22x1,5) stays free of stress.
• Sealing cone with an O-ring at tube stud 14 S for a soft joint that can be undone repeatedly.
• Working pressure up to 630 bar in the heavy series.
• Temperature range -35 to +100 °C for the body in zinc-plated steel.

Applications

When splitting a flow between two consumers the version in zinc-plated steel holds 630 bar on both paths.

Standards and conformity

The coupling belongs to the cutting ring system for precision tubes. The tube is cut off square, deburred inside and out and cleaned, and no tube cutter is used.