Adjustable T connector with cone, tube 10 L, NC clamping ring 1.4571

The adjustable T connector splits a line into two paths and joins the tube to a tube stud with a sealing cone and an O-ring. The article is listed with a working pressure of 315 bar. The stated figures are tube stud 10 L and tube connection 10 L (M16x1.5). This version is supplied with light series and clamping system NC clamping ring.

Benefits

• The tee branches the line off without needing a second port on the device.
• The branch can be set to any direction before it is locked, so tube 10 L (M16x1,5) stays free of stress.
• Sealing cone with an O-ring at tube stud 10 L for a soft joint that can be undone repeatedly.
• Working pressure up to 315 bar in the light series.
• Temperature range -20 to +200 °C for the body in stainless steel 1.4571.

Applications

When splitting a flow between two consumers the version in stainless steel 1.4571 holds 315 bar on both paths.

Standards and conformity

The coupling belongs to the cutting ring system for precision tubes. The tube is cut off square, deburred inside and out and cleaned, and no tube cutter is used.