Adjustable male stud tee, M 48x2, tube 38 S, zinc-plated steel

As a adjustable male stud tee the article connects a precision tube to a metric male stud thread and branches off an adjustable third path. The data state a working pressure of 315 bar. This version is listed with male stud thread M 48x2 and tube connection 38 S (M52x2). Material zinc-plated steel is listed for this version. Also stated are heavy series.

Benefits

• The branch can be turned to any direction before it is locked, so tube 38 S (M52x2) follows the existing route.
• Metric male stud thread M 48x2 with an elastomer seal for a direct connection at the device.
• Working pressure up to 315 bar in the heavy series.
• Temperature range -35 to +100 °C for the body in zinc-plated steel.
• Tube connection 38 S (M52x2) through a cutting ring, with no extra seal at the tube.

Applications

When retrofitting a measuring point on a line of the heavy series the second threaded port on the device is not needed.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.