Adjustable male stud tee, M 22x1.5, tube 18 L, zinc-plated steel, no nut or ring

This adjustable male stud tee connects a precision tube to a metric male stud thread and branches off an adjustable third path. The data state a working pressure of 315 bar. The stated material is zinc-plated steel. This version is supplied with light series and scope of delivery without nut and cutting ring.

Benefits

• The branch can be turned to any direction before it is locked, so tube 18 L (M26x1,5) follows the existing route.
• Metric male stud thread M 22x1.5 with an elastomer seal for a direct connection at the device.
• Working pressure up to 315 bar in the light series.
• Temperature range -35 to +100 °C for the body in zinc-plated steel.
• Tube connection 18 L (M26x1,5) through a cutting ring, with no extra seal at the tube.

Applications

When retrofitting a measuring point on a line of the light series the second threaded port on the device is not needed.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.