Adjustable male stud tee, M 42x2, tube 35 L, stainless steel 1.4571

In use, the adjustable male stud tee connects a precision tube to a metric male stud thread and branches off an adjustable third path. This version is listed with male stud thread M 42x2 and tube connection 35 L (M45x2). Its rating is a working pressure of 160 bar. In addition the data give light series.

Benefits

• The branch can be turned to any direction before it is locked, so tube 35 L (M45x2) follows the existing route.
• Metric male stud thread M 42x2 with an elastomer seal for a direct connection at the device.
• Working pressure up to 160 bar in the light series.
• Temperature range -20 to +200 °C for the body in stainless steel 1.4571.
• Tube connection 35 L (M45x2) through a cutting ring, with no extra seal at the tube.

Technical data

Applications

When retrofitting a measuring point on a line of the light series the second threaded port on the device is not needed.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.