Adjustable male stud tee, M 27x2, tube 20 S, stainless steel 1.4571

Once installed, the adjustable male stud tee connects a precision tube to a metric male stud thread and branches off an adjustable third path. This version is listed with male stud thread M 27x2 and tube connection 20 S (M30x2). Its rating is a working pressure of 400 bar. The version is listed with heavy series.

Benefits

• The branch can be turned to any direction before it is locked, so tube 20 S (M30x2) follows the existing route.
• Metric male stud thread M 27x2 with an elastomer seal for a direct connection at the device.
• Working pressure up to 400 bar in the heavy series.
• Temperature range -20 to +200 °C for the body in stainless steel 1.4571.
• Tube connection 20 S (M30x2) through a cutting ring, with no extra seal at the tube.

Applications

When retrofitting a measuring point on a line of the heavy series the second threaded port on the device is not needed.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.