Adjustable male stud tee, M 14x1.5, tube 8 S, zinc-plated steel, no nut or ring

The adjustable male stud tee connects a precision tube to a metric male stud thread and branches off an adjustable third path. This version is listed with male stud thread M 14x1.5 and tube connection 8 S (M16x1.5). Its rating is a working pressure of 630 bar. The version is listed with heavy series and scope of delivery without nut and cutting ring.

Benefits

• The branch can be turned to any direction before it is locked, so tube 8 S (M16x1,5) follows the existing route.
• Metric male stud thread M 14x1.5 with an elastomer seal for a direct connection at the device.
• Working pressure up to 630 bar in the heavy series.
• Temperature range -35 to +100 °C for the body in zinc-plated steel.
• Tube connection 8 S (M16x1,5) through a cutting ring, with no extra seal at the tube.

Applications

When retrofitting a measuring point on a line of the heavy series the second threaded port on the device is not needed.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.