Adjustable male stud tee, M 16x1.5, tube 10 S, zinc-plated steel, no nut or ring

Once installed, the adjustable male stud tee connects a precision tube to a metric male stud thread and branches off an adjustable third path. The data also state a temperature range of -35 to +100 °C. The stated figure is a working pressure of 630 bar. In addition the data give heavy series and scope of delivery without nut and cutting ring.

Benefits

• The branch can be turned to any direction before it is locked, so tube 10 S (M18x1,5) follows the existing route.
• Metric male stud thread M 16x1.5 with an elastomer seal for a direct connection at the device.
• Working pressure up to 630 bar in the heavy series.
• Temperature range -35 to +100 °C for the body in zinc-plated steel.
• Tube connection 10 S (M18x1,5) through a cutting ring, with no extra seal at the tube.

Applications

In a plant in zinc-plated steel the branch holds 630 bar and still stays adjustable.

Standards and conformity

The coupling belongs to the cutting ring system for precision tubes. The tube is cut off square, deburred inside and out and cleaned, and no tube cutter is used.