Adjustable L connector, tube 22 L, NC clamping ring 1.4571, with sealing cone and O-ring

Once installed, the adjustable L connector turns a precision tube through 90 degrees and joins it to a tube stud with a sealing cone and an O-ring. It is produced from stainless steel 1.4571. The data give tube stud 22 L and tube connection 22 L (M30x2). In addition the data give light series and clamping system NC clamping ring.

Benefits

• The elbow can be set to any direction before it is locked, so tube 22 L (M30x2) stays free of stress.
• Sealing cone with an O-ring at tube stud 22 L, so the joint seals softly and can be undone repeatedly.
• Working pressure up to 160 bar in the light series.
• Temperature range -20 to +200 °C, the limit is set by the O-ring and not by the body in stainless steel 1.4571.
• Tube connection 22 L (M30x2) through a cutting ring, the tube is held by both form and friction.

Applications

In a control cabinet or power unit in stainless steel 1.4571 the adjustable corner saves the tube bend that would otherwise be needed and holds 160 bar.

Standards and conformity

The coupling belongs to the cutting ring system for precision tubes. The tube is cut off square, deburred inside and out and cleaned, and no tube cutter is used.