Drawn stainless steel tube DIN EN ISO 1127, outside diameter 20 mm, wall 2 mm, 1.4541

This stainless steel tube to DIN EN ISO 1127 carries media through the plant in a drawn wall without a weld seam. The data state a working pressure range of -1 to 276 bar. This version is listed with 20 mm outside diameter and 2 mm wall thickness. The stated material is stainless steel 1.4541.

Benefits

• Drawn without a weld seam to DIN EN ISO 1127, outside diameter 20 mm.
• Wall thickness 2 mm for a working pressure of -1 to 276 bar.
• Material 1.4541, heat treated and supplied with a matt or bright annealed surface.
• Every tube is eddy current tested to 100 percent under 80 bar pressure.
• Tolerances to DIN EN ISO 1127 in D4/T3, above 42 mm outside diameter in D3/T3.

Applications

For cutting ring and clamping ring connections the outside diameter 20 mm with 2 mm wall thickness is cut to length and deburred.

Standards and conformity

Outside diameter 20 mm and wall thickness 2 mm follow DIN EN ISO 1127 with tolerance D4/T3.